X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsynquacer.h;h=daa9bbec88a7c43fc2b6d0d49dc2b8b277fcd953;hb=aa6e94deabb45154cea07ad44c4a5c047bca078b;hp=225d017d17da233e6173e1e269e8169e59501012;hpb=7cfbba36e9f84312afe8cd6d12db4e9e9c1e04b5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
index 225d017..daa9bbe 100644
--- a/include/configs/synquacer.h
+++ b/include/configs/synquacer.h
@@ -6,13 +6,12 @@
 #define __CONFIG_H
 
 /* Timers for fasp(TIMCLK) */
-#define CONFIG_SYS_HZ			1000		/* 1 msec */
 #define CONFIG_SYS_TIMERBASE		0x31080000	/* AP Timer 1 (ARM-SP804) */
 
 /*
  * SDRAM (for initialize)
  */
-#define CONFIG_SYS_SDRAM_BASE		(0x80000000)	/* Start address of DDR3 */
+#define CFG_SYS_SDRAM_BASE		(0x80000000)	/* Start address of DDR3 */
 #define PHYS_SDRAM_SIZE			(0x7c000000)	/* Default size (2GB - Secure memory) */
 
 #define CONFIG_VERY_BIG_RAM				/* SynQuacer supports up to 64GB */
@@ -23,7 +22,6 @@
 /*
  * Boot info
  */
-#define CONFIG_SYS_INIT_SP_ADDR		(0xe0000000)	/* stack of init proccess */
 
 /*
  * Hardware drivers support
@@ -34,38 +32,34 @@
 
 /* Serial (pl011)       */
 #define UART_CLK			(62500000)
-#define CONFIG_SERIAL_MULTI
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK		UART_CLK
 #define CONFIG_PL01x_PORTS		{(void *)(0x2a400000)}
 
-#define CONFIG_ENV_OVERWRITE		/* ethaddr can be reprogrammed */
-
 /* Support MTD */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_FLASH_BASE		(0x08000000)
 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE}
 
-#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + (512 * 1024))
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE)
-
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200, 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_MAXARGS		128
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
-/* #define CONFIG_SYS_PCI_64BIT		1 */
 
 #define DEFAULT_DFU_ALT_INFO "dfu_alt_info="				\
-			"mtd mx66u51235f=u-boot.bin raw 200000 100000;"	\
+			"mtd nor1=u-boot.bin raw 200000 100000;"	\
 			"fip.bin raw 180000 78000;"			\
 			"optee.bin raw 500000 100000\0"
 
+/* GUIDs for capsule updatable firmware images */
+#define DEVELOPERBOX_UBOOT_IMAGE_GUID \
+	EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
+		 0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
+
+#define DEVELOPERBOX_FIP_IMAGE_GUID \
+	EFI_GUID(0x880866e9, 0x84ba, 0x4793, 0xa9, 0x08, \
+		 0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
+
+#define DEVELOPERBOX_OPTEE_IMAGE_GUID \
+	EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
+		 0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
+
 /* Distro boot settings */
-#ifndef CONFIG_SPL_BUILD
 #ifdef CONFIG_CMD_USB
 #define BOOT_TARGET_DEVICE_USB(func)	func(USB, usb, 0)
 #else
@@ -97,9 +91,6 @@
 	BOOT_TARGET_DEVICE_NVME(func)	\
 
 #include <config_distro_bootcmd.h>
-#else /* CONFIG_SPL_BUILD */
-#define BOOTENV
-#endif
 
 #define	CONFIG_EXTRA_ENV_SETTINGS		\
 	"fdt_addr_r=0x9fe00000\0"		\