X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsvm_sc8xx.h;h=b4aa948565bbae9b459fffda5d21c9d9702f4625;hb=19210ae9838a867ce0243c41eafe928317c15b10;hp=425f472a7fd6f06d76c7a6ea7b8b77256e14a039;hpb=2419169f5749d7af501b3b77a5336d1d535320de;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 425f472..b4aa948 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2000, 2001, 2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -31,11 +15,14 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define	CONFIG_SYS_TEXT_BASE	0x40000000
+
 /* Custom configuration */
 /* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */
 /* SC85T,SC860T, FEL8xx-AT(855T/860T) */
 /*#define CONFIG_FEL8xx_AT */
 /*#define CONFIG_LCD */
+/*#define CONFIG_MPC8XX_LCD*/
 /* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */
 /* #define CONFIG_50MHz */
 /* #define CONFIG_66MHz */
@@ -153,10 +140,8 @@
  * Miscellaneous configurable options
  */
 #define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
@@ -173,10 +158,6 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -191,9 +172,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -361,6 +341,8 @@
 
 #undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET	1	/* Use postreset IDE hook */
 #define	CONFIG_IDE_8xx_DIRECT	1	/* Direct IDE    not supported	*/
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
@@ -465,13 +447,4 @@
 #define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 #define CONFIG_SYS_DOC_BASE 0x80000000
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */