X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsunxi-common.h;h=accc21f56fc7f9ef86ba513545fce9aadc014d6e;hb=f89d6133eef2e068f9c33853b6584d7fcbfa9d2e;hp=9d9e9ce1734c995ab465d98cb5f9ff45bd85aba8;hpb=b75643ad0a2429e7efc7317517b47203c3c2f7c9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 9d9e9ce..accc21f 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
  *
@@ -6,8 +7,6 @@
  * Tom Cubie <tangliang@allwinnertech.com>
  *
  * Configuration settings for the Allwinner sunxi series of boards.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _SUNXI_COMMON_CONFIG_H
@@ -33,7 +32,6 @@
 #endif
 
 #ifdef CONFIG_ARM64
-#define CONFIG_BUILD_TARGET "u-boot.itb"
 #define CONFIG_SYS_BOOTM_LEN		(32 << 20)
 #endif
 
@@ -83,38 +81,30 @@
 
 #define CONFIG_SPL_BSS_MAX_SIZE		0x00080000 /* 512 KiB */
 
-#ifdef CONFIG_SUNXI_HIGH_SRAM
 /*
  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
+ * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register
+ * is known yet.
+ * H6 has SRAM A1 at 0x00020000.
  */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x10000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x08000	/* FIXME: 40 KiB ? */
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR	0x0
-#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* 32 KiB */
-#endif
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SUNXI_SRAM_ADDRESS
+/* FIXME: this may be larger on some SoCs */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x8000 /* 32 KiB */
 
 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_0			CONFIG_SYS_SDRAM_BASE
 #define PHYS_SDRAM_0_SIZE		0x80000000 /* 2 GiB */
 
 #ifdef CONFIG_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SUNXI_AHCI
 #define CONFIG_SYS_64BIT_LBA
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -126,9 +116,6 @@
 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE 8
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 #endif
 
 #ifdef CONFIG_SPL_SPI_SUNXI
@@ -159,8 +146,6 @@
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #endif
 #define CONFIG_SYS_MMC_MAX_DEVICE	4
-#elif defined(CONFIG_ENV_IS_NOWHERE)
-#define CONFIG_ENV_SIZE			(128 << 10)
 #endif
 
 #ifndef CONFIG_MACH_SUN8I_V3S
@@ -188,8 +173,11 @@
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 #endif
 
-#ifdef CONFIG_SUNXI_HIGH_SRAM
-#define CONFIG_SPL_TEXT_BASE		0x10060		/* sram start+header */
+/*
+ * We cannot use expressions here, because expressions won't be evaluated in
+ * autoconf.mk.
+ */
+#if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000
 #define CONFIG_SPL_MAX_SIZE		0x7fa0		/* 32 KiB */
 #ifdef CONFIG_ARM64
 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
@@ -197,8 +185,11 @@
 #else
 #define LOW_LEVEL_SRAM_STACK		0x00018000
 #endif /* !CONFIG_ARM64 */
+#elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000
+#define CONFIG_SPL_MAX_SIZE		0x7fa0		/* 32 KiB */
+/* end of SRAM A2 on H6 for now */
+#define LOW_LEVEL_SRAM_STACK		0x00118000
 #else
-#define CONFIG_SPL_TEXT_BASE		0x60		/* sram start+header */
 #define CONFIG_SPL_MAX_SIZE		0x5fa0		/* 24KB on sun4i/sun7i */
 #define LOW_LEVEL_SRAM_STACK		0x00008000	/* End of sram */
 #endif
@@ -287,30 +278,20 @@ extern int soft_i2c_gpio_scl;
 #endif /* CONFIG_VIDEO_SUNXI */
 
 /* Ethernet support */
-#ifdef CONFIG_SUN4I_EMAC
-#define CONFIG_MII			/* MII PHY management		*/
-#endif
 
 #ifdef CONFIG_SUN7I_GMAC
-#define CONFIG_MII			/* MII PHY management		*/
 #define CONFIG_PHY_REALTEK
 #endif
 
 #ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_OHCI_SUNXI
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 #endif
 
-#ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
-#endif
-
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_PREBOOT
 #endif
 
-#define CONFIG_MISC_INIT_R
-
 #ifndef CONFIG_SPL_BUILD
 
 #ifdef CONFIG_ARM64
@@ -459,7 +440,6 @@ extern int soft_i2c_gpio_scl;
 	"stdout=serial,vga\0" \
 	"stderr=serial,vga\0"
 #elif CONFIG_DM_VIDEO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONSOLE_STDOUT_SETTINGS \
 	"stdout=serial,vidconsole\0" \
 	"stderr=serial,vidconsole\0"