X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsunxi-common.h;h=997a92c8be0b03e7ad8b2c9749b0d3f57a87fc41;hb=cb33bda44f4bbf6fb58adf41dced313ca38da6fc;hp=1d475b10ddf491eca0ecf34bae39bc2c92c9bc60;hpb=089795090a627f4216c5f21eaf436ba1672cf02e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 1d475b1..997a92c 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -69,7 +69,12 @@
 #define SDRAM_OFFSET(x) 0x4##x
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define CONFIG_SYS_LOAD_ADDR		0x42000000 /* default load address */
+/* V3s do not have enough memory to place code at 0x4a000000 */
+#ifndef CONFIG_MACH_SUN8I_V3S
 #define CONFIG_SYS_TEXT_BASE		0x4a000000
+#else
+#define CONFIG_SYS_TEXT_BASE		0x42e00000
+#endif
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
@@ -146,8 +151,13 @@
 #define CONFIG_ENV_SIZE			(128 << 10)
 #endif
 
+#ifndef CONFIG_MACH_SUN8I_V3S
 /* 64MB of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (64 << 20))
+#else
+/* 2MB of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (2 << 20))
+#endif
 
 /*
  * Miscellaneous configurable options
@@ -201,11 +211,13 @@
 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
+#ifndef CONFIG_DM_I2C
+#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SPEED		400000
 #define CONFIG_SYS_I2C_SLAVE		0x7f
 #endif
+#endif
 
 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 #define CONFIG_SYS_I2C_SOFT
@@ -231,10 +243,6 @@ extern int soft_i2c_gpio_scl;
     defined CONFIG_SY8106A_POWER
 #endif
 
-#ifndef CONFIG_CONS_INDEX
-#define CONFIG_CONS_INDEX              1       /* UART0 */
-#endif
-
 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 #if CONFIG_CONS_INDEX == 1
 #ifdef CONFIG_MACH_SUN9I
@@ -344,6 +352,7 @@ extern int soft_i2c_gpio_scl;
  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
  * Align the initrd to a 2MB page.
  */
+#define BOOTM_SIZE	__stringify(0xa000000)
 #define KERNEL_ADDR_R	__stringify(SDRAM_OFFSET(0080000))
 #define FDT_ADDR_R	__stringify(SDRAM_OFFSET(FA00000))
 #define SCRIPT_ADDR_R	__stringify(SDRAM_OFFSET(FC00000))
@@ -356,16 +365,30 @@ extern int soft_i2c_gpio_scl;
  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
  * 1M script, 1M pxe and the ramdisk at the end.
  */
-
+#ifndef CONFIG_MACH_SUN8I_V3S
+#define BOOTM_SIZE     __stringify(0xa000000)
 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
+#else
+/*
+ * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
+ * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe and the ramdisk at the end.
+ */
+#define BOOTM_SIZE     __stringify(0x2e00000)
+#define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
+#define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
+#define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
+#endif
 #endif
 
 #define MEM_LAYOUT_ENV_SETTINGS \
-	"bootm_size=0xa000000\0" \
+	"bootm_size=" BOOTM_SIZE "\0" \
 	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
 	"fdt_addr_r=" FDT_ADDR_R "\0" \
 	"scriptaddr=" SCRIPT_ADDR_R "\0" \
@@ -452,6 +475,11 @@ extern int soft_i2c_gpio_scl;
 #define CONSOLE_STDOUT_SETTINGS \
 	"stdout=serial,vga\0" \
 	"stderr=serial,vga\0"
+#elif CONFIG_DM_VIDEO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONSOLE_STDOUT_SETTINGS \
+	"stdout=serial,vidconsole\0" \
+	"stderr=serial,vidconsole\0"
 #else
 #define CONSOLE_STDOUT_SETTINGS \
 	"stdout=serial\0" \
@@ -476,11 +504,17 @@ extern int soft_i2c_gpio_scl;
 	CONSOLE_STDIN_SETTINGS \
 	CONSOLE_STDOUT_SETTINGS
 
+#ifdef CONFIG_ARM64
+#define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
+#else
+#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
+#endif
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONSOLE_ENV_SETTINGS \
 	MEM_LAYOUT_ENV_SETTINGS \
 	DFU_ALT_INFO_RAM \
-	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	"fdtfile=" FDTFILE "\0" \
 	"console=ttyS0,115200\0" \
 	SUNXI_MTDIDS_DEFAULT \
 	SUNXI_MTDPARTS_DEFAULT \