X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fstxssa.h;h=914d82190597110e9b2d23e01ba8c2ef10bb3085;hb=1d2f74690cace803844bce198a6d5fa1b6cd11f9;hp=a421ba43b2329a538aa945499ff542a3f3943c03;hpb=e46fedfeb214d118b9983d11fcc929ed49f5ccd7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index a421ba4..914d821 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -7,23 +7,7 @@
  * (C) Copyright 2002,2003 Motorola,Inc.
  * Xianghua Xiao <X.Xiao@motorola.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /* mpc8560ads board configuration file */
@@ -38,7 +22,6 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE		1	/* BOOKE		*/
 #define CONFIG_E500		1	/* BOOKE e500 family	*/
-#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_STXSSA		1	/* Silicon Tx GPPP SSA board specific*/
 #define CONFIG_MPC8560		1
@@ -46,6 +29,7 @@
 #define	CONFIG_SYS_TEXT_BASE	0xFFF80000
 
 #define CONFIG_PCI			/* PCI ethernet support	*/
+#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support*/
 #undef CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -127,7 +111,7 @@
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR1
+#define CONFIG_SYS_FSL_DDR1
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
 #undef CONFIG_FSL_DDR_INTERACTIVE
@@ -188,9 +172,6 @@
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support   */
 #define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT		1
@@ -200,13 +181,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 #undef CONFIG_SYS_I2C_NOPROBES
-#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337		/* This is really a DS1339 RTC	*/
@@ -239,7 +219,6 @@
 
 #if defined(CONFIG_PCI)			/* PCI Ethernet card */
 #define CONFIG_MPC85XX_PCI2	1
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
 #define CONFIG_EEPRO100
@@ -258,10 +237,6 @@
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI	1
-#endif
-
 #define CONFIG_MII		1	/* MII PHY management		*/
 
 #define CONFIG_TSEC1	1
@@ -290,8 +265,8 @@
    * - Select bus for bd/buffers
    * - Full duplex
    */
-  #define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-  #define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+  #define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+  #define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
   #define CONFIG_SYS_CPMFCR_RAMTYPE	0
 #if 0
   #define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE)
@@ -390,7 +365,6 @@
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -401,7 +375,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*Note: change below for your network setting!!! */
@@ -431,8 +404,8 @@
 #define CONFIG_GATEWAYIP	192.168.85.1
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_HOSTNAME		STX_SSA
-#define CONFIG_ROOTPATH		/gppproot
-#define CONFIG_BOOTFILE		uImage
+#define CONFIG_ROOTPATH		"/gppproot"
+#define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_LOADADDR		0x1000000
 
 #else /* ENV IS IN FLASH		-- use a full-blown envionment */