X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fstxgp3.h;h=939a964e7f94ab29470f43e22e875aa4a2edfd8e;hb=bb367b95f9204115bd6eac82e839b5590e6da4eb;hp=c2497ad09c1266d374cf579e8ab60d697d1f6366;hpb=1032d97496f6d534bf0030a5779ff1cb38cc9ebf;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index c2497ad..939a964e 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -109,12 +109,9 @@
 
 #ifdef CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0x40000000	/* CCSRBAR by BDI cfg	*/
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
 #endif
-#define CONFIG_SYS_CCSRBAR             0xfdf00000      /* relocated CCSRBAR    */
-#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
+#define CONFIG_SYS_CCSRBAR		0xfdf00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -123,7 +120,7 @@
 #undef CONFIG_FSL_DDR_INTERACTIVE
 
 #undef  CONFIG_DDR_ECC			/* only for ECC DDR module */
-#define CONFIG_DDR_DLL                  /* possible DLL fix needed */
+#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	/* possible DLL fix needed */
 #define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
 
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
@@ -176,7 +173,6 @@
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -212,7 +208,6 @@
 
 #if defined(CONFIG_PCI)			/* PCI Ethernet card */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -231,10 +226,6 @@
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI	1
-#endif
-
 #define CONFIG_MII		1	/* MII PHY management		*/
 
 #define CONFIG_TSEC1	1
@@ -263,8 +254,8 @@
    * - Select bus for bd/buffers
    * - Full duplex
    */
-  #define CONFIG_SYS_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-  #define CONFIG_SYS_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+  #define CONFIG_SYS_CMXFCR_MASK2      (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+  #define CONFIG_SYS_CMXFCR_VALUE2     (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
   #define CONFIG_SYS_CPMFCR_RAMTYPE    0
 #if 0
   #define CONFIG_SYS_FCC_PSMR          (FCC_PSMR_FDE)
@@ -385,8 +376,8 @@
 #define CONFIG_GATEWAYIP	192.168.85.1
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_HOSTNAME		STX_GP3
-#define CONFIG_ROOTPATH		/gppproot
-#define CONFIG_BOOTFILE		uImage
+#define CONFIG_ROOTPATH		"/gppproot"
+#define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_LOADADDR		0x1000000
 
 #endif	/* __CONFIG_H */