X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fstv0991.h;h=567aa1ffe4331bb97d37d4d7b6d778dae047db35;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=2f808c6c72daac3a699cbde0bb0d1ee3af8ca504;hpb=f40574e2d78c96a3818c4fa2379382d924866a6e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index 2f808c6..567aa1f 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -1,77 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * (C) Copyright 2014
- * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
+ * Copyright (C) 2014, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
  */
 
 #ifndef __CONFIG_STV0991_H
 #define __CONFIG_STV0991_H
-#define CONFIG_SYS_DCACHE_OFF
 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
 
-#define CONFIG_SYS_CORTEX_R4
-
 /* ram memory-related information */
-#define CONFIG_NR_DRAM_BANKS			1
 #define PHYS_SDRAM_1				0x00000000
 #define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
 #define PHYS_SDRAM_1_SIZE			0x00198000
 
-#define CONFIG_ENV_SIZE				0x10000
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SECT_SIZE			CONFIG_ENV_SIZE
-#define CONFIG_ENV_OFFSET			0x30000
-#define CONFIG_ENV_ADDR				\
-	(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
-#define CONFIG_SYS_MAXARGS			16
-#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 16 * 1024)
-
-/* serial port (PL011) configuration */
-#define CONFIG_PL01X_SERIAL
-
 /* user interface */
-#define CONFIG_SYS_CBSIZE			1024
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE \
-						+sizeof(CONFIG_SYS_PROMPT) + 16)
 
 /* MISC */
-#define CONFIG_SYS_LOAD_ADDR			0x00000000
 #define CONFIG_SYS_INIT_RAM_SIZE		0x8000
 #define CONFIG_SYS_INIT_RAM_ADDR		0x00190000
-#define CONFIG_SYS_INIT_SP_OFFSET		\
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 /* U-Boot Load Address */
-#define CONFIG_SYS_TEXT_BASE			0x00010000
-#define CONFIG_SYS_INIT_SP_ADDR			\
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* GMAC related configs */
-
-#define CONFIG_MII
-#define CONFIG_DW_ALTDESCRIPTOR
-#define CONFIG_PHY_MICREL
-
-/* Command support defines */
-#define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
-
-#define CONFIG_SYS_MEMTEST_START               0x0000
-#define CONFIG_SYS_MEMTEST_END                 1024*1024
 
 /* Misc configuration */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_BOOTCOMMAND                     "go 0x40040000"
-
-/*
-+ * QSPI support
-+ */
-#ifdef CONFIG_OF_CONTROL		/* QSPI is controlled via DT */
-#define CONFIG_CQSPI_DECODER		0
-#define CONFIG_CQSPI_REF_CLK		((30/4)/2)*1000*1000
-#define CONFIG_BOUNCE_BUFFER
-
-#endif
 
 #endif /* __CONFIG_H */