X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fstrider.h;h=972543d6bd10b2e2d2eed92c9f72041c727b0478;hb=2fe88d452268d61b5ca9cb0b1dda2974cc43faeb;hp=90492f4fdb6c1b903f4b11d39abe1270de690e43;hpb=d77fa2ff766bbb4b867e791187f78b6033071613;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/strider.h b/include/configs/strider.h
index 90492f4..972543d 100644
--- a/include/configs/strider.h
+++ b/include/configs/strider.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2014
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
  *
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,34 +17,7 @@
 #define CONFIG_MPC8308		1 /* MPC8308 CPU specific */
 #define CONFIG_STRIDER		1 /* STRIDER board specific */
 
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#ifdef CONFIG_STRIDER_CPU_DP
-#define CONFIG_IDENT_STRING	" strider cpu dp 0.01"
-#elif defined(CONFIG_STRIDER_CPU)
-#define CONFIG_IDENT_STRING	" strider cpu 0.01"
-#elif defined(CONFIG_STRIDER_CON_DP)
-#define CONFIG_IDENT_STRING	" strider con dp 0.01"
-#else
-#define CONFIG_IDENT_STRING	" strider con 0.01"
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
-#define CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_CMD_FPGAD
-#define CONFIG_CMD_IOLOOP
 
 /*
  * System Clock Setup
@@ -229,15 +201,12 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER		/* use the CFI driver */
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_FLASH_CFI_LEGACY
 #define CONFIG_SYS_FLASH_LEGACY_512Kx16
 
 #define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
 #define CONFIG_SYS_FLASH_SIZE		8 /* FLASH size is up to 8M */
-#define CONFIG_SYS_FLASH_PROTECTION	1 /* Use h/w Flash protection. */
 
 /* Window base at flash base */
 #define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
@@ -299,7 +268,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX	2
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -320,8 +288,6 @@
 #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 
 #define CONFIG_PCA953X			/* NXP PCA9554 */
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x24, 16}, {0x25, 16}, {0x26, 16}, \
 					  {0x3c, 8}, {0x3d, 8}, {0x3e, 8} }
 
@@ -518,26 +484,21 @@ void fpga_control_clear(unsigned int bus, int pin);
 /* enable PCIE clock */
 #define CONFIG_SYS_SCCR_PCIEXP1CM	1
 
-#define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCIE
 
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
-
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
 #define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
 
 /*
  * TSEC
  */
-#define CONFIG_TSEC_ENET	/* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET	0x24000
 #define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 
 /*
  * TSEC ethernet configuration
  */
-#define CONFIG_MII		1 /* MII PHY management */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC1_NAME	"eTSEC0"
 #define TSEC1_PHY_ADDR		1
@@ -551,7 +512,6 @@ void fpga_control_clear(unsigned int bus, int pin);
  * Environment
  */
 #if 1
-#define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
 				 CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_ENV_SECT_SIZE	0x10000 /* 64K(one sector) for env */
@@ -559,7 +519,6 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 #else
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE		0x2000		/* 8KB */
 #endif
 
@@ -569,27 +528,15 @@ void fpga_control_clear(unsigned int bus, int pin);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PCI
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
 #define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
-#undef CONFIG_ZERO_BOOTDELAY_CHECK	/* ignore keypress on bootdelay==0 */
-
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /*
@@ -655,13 +602,10 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_HAS_ETH0
 #endif
 
-#define CONFIG_BAUDRATE 115200
-
 #define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY	5	/* -1 disables auto-boot */
 
-#define CONFIG_HOSTNAME		hrcon
+#define CONFIG_HOSTNAME		"hrcon"
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
 #define CONFIG_BOOTFILE		"uImage"