X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fstrider.h;h=0757c89f7e23c79c48eacb9a4514fc2322e5dbe5;hb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;hp=5cd37d700f0d637e7676533c86560b1fe8221d4f;hpb=cbe7706ab8aab06c18edaa9b120371f9c8012728;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/strider.h b/include/configs/strider.h
index 5cd37d7..0757c89 100644
--- a/include/configs/strider.h
+++ b/include/configs/strider.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2014
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
  *
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,24 +17,7 @@
 #define CONFIG_MPC8308		1 /* MPC8308 CPU specific */
 #define CONFIG_STRIDER		1 /* STRIDER board specific */
 
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
-#define CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_CMD_FPGAD
-#define CONFIG_CMD_IOLOOP
 
 /*
  * System Clock Setup
@@ -289,7 +271,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX	2
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -310,8 +291,6 @@
 #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 
 #define CONFIG_PCA953X			/* NXP PCA9554 */
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x24, 16}, {0x25, 16}, {0x26, 16}, \
 					  {0x3c, 8}, {0x3d, 8}, {0x3e, 8} }
 
@@ -508,19 +487,15 @@ void fpga_control_clear(unsigned int bus, int pin);
 /* enable PCIE clock */
 #define CONFIG_SYS_SCCR_PCIEXP1CM	1
 
-#define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCIE
 
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
-
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
 #define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
 
 /*
  * TSEC
  */
-#define CONFIG_TSEC_ENET	/* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET	0x24000
 #define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 
@@ -541,7 +516,6 @@ void fpga_control_clear(unsigned int bus, int pin);
  * Environment
  */
 #if 1
-#define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
 				 CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_ENV_SECT_SIZE	0x10000 /* 64K(one sector) for env */
@@ -549,7 +523,6 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 #else
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE		0x2000		/* 8KB */
 #endif
 
@@ -559,25 +532,15 @@ void fpga_control_clear(unsigned int bus, int pin);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PCI
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
 #define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /*
@@ -643,12 +606,10 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_HAS_ETH0
 #endif
 
-#define CONFIG_BAUDRATE 115200
-
 #define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
 
 
-#define CONFIG_HOSTNAME		hrcon
+#define CONFIG_HOSTNAME		"hrcon"
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
 #define CONFIG_BOOTFILE		"uImage"