X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fstm32mp15_common.h;h=f78ce41ed85446c3edd7dcaaa9020f4d25167a7e;hb=aa6e94deabb45154cea07ad44c4a5c047bca078b;hp=175d546a158c68d2c396e35eda4b1dbe648a0047;hpb=d5e8119baed0dda4bd38984c1a16a8409f9219af;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h
index 175d546..f78ce41 100644
--- a/include/configs/stm32mp15_common.h
+++ b/include/configs/stm32mp15_common.h
@@ -10,22 +10,10 @@
 #include <linux/sizes.h>
 #include <asm/arch/stm32.h>
 
-#ifdef CONFIG_ARMV7_PSCI
-/* PSCI support */
-#define CONFIG_ARMV7_SECURE_BASE		STM32_SYSRAM_BASE
-#define CONFIG_ARMV7_SECURE_MAX_SIZE		STM32_SYSRAM_SIZE
-#endif
-
 /*
  * Configuration of the external SRAM memory used by U-Boot
  */
-#define CONFIG_SYS_SDRAM_BASE			STM32_DDR_BASE
-#define CONFIG_SYS_INIT_SP_ADDR			CONFIG_SYS_TEXT_BASE
-
-/*
- * Console I/O buffer size
- */
-#define CONFIG_SYS_CBSIZE			SZ_1K
+#define CFG_SYS_SDRAM_BASE			STM32_DDR_BASE
 
 /*
  * For booting Linux, use the first 256 MB of memory, since this is
@@ -33,33 +21,17 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		SZ_256M
 
-/* Extend size of kernel image for uncompression */
-#define CONFIG_SYS_BOOTM_LEN		SZ_32M
-
-/* SPL support */
-#ifdef CONFIG_SPL
-/* SPL use DDR */
-#define CONFIG_SYS_SPL_MALLOC_START	0xC0300000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x01D00000
-
-/* Restrict SPL to fit within SYSRAM */
-#define STM32_SYSRAM_END		(STM32_SYSRAM_BASE + STM32_SYSRAM_SIZE)
-#define CONFIG_SPL_MAX_FOOTPRINT	(STM32_SYSRAM_END - CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SPL_STACK		(STM32_SYSRAM_BASE + \
-					 STM32_SYSRAM_SIZE)
-#endif /* #ifdef CONFIG_SPL */
-/*MMC SD*/
-#define CONFIG_SYS_MMC_MAX_DEVICE	3
-
 /* NAND support */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
 
 /* Ethernet need */
 #ifdef CONFIG_DWC_ETH_QOS
 #define CONFIG_SERVERIP                 192.168.1.1
-#define CONFIG_SYS_AUTOLOAD		"no"
 #endif
 
+#define STM32MP_FIP_IMAGE_GUID \
+	EFI_GUID(0x19d5df83, 0x11b0, 0x457b, 0xbe, 0x2c, \
+		 0x75, 0x59, 0xc1, 0x31, 0x42, 0xa5)
+
 /*****************************************************************************/
 #ifdef CONFIG_DISTRO_DEFAULTS
 /*****************************************************************************/
@@ -83,7 +55,7 @@
 #endif
 
 #ifdef CONFIG_CMD_UBIFS
-#define BOOT_TARGET_UBIFS(func)	func(UBIFS, ubifs, 0)
+#define BOOT_TARGET_UBIFS(func)	func(UBIFS, ubifs, 0, UBI, boot)
 #else
 #define BOOT_TARGET_UBIFS(func)
 #endif
@@ -103,7 +75,7 @@
 	BOOT_TARGET_PXE(func)
 
 /*
- * default bootcmd for stm32mp1:
+ * default bootcmd for stm32mp15:
  * for serial/usb: execute the stm32prog command
  * for mmc boot (eMMC, SD card), distro boot on the same mmc device
  * for nand or spi-nand boot, distro boot with ubifs on UBI partition