X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fstm32mp1.h;h=f271b84a59eda33ade155969727794b12d0e20d5;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=a66534e0278818a9d133fbbcb99fd20fed45dd8a;hpb=07add22cab3be86067c227a30ad5d0feab541316;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h index a66534e..f271b84 100644 --- a/include/configs/stm32mp1.h +++ b/include/configs/stm32mp1.h @@ -10,7 +10,7 @@ #include #include -#ifndef CONFIG_STM32MP1_TRUSTED +#ifndef CONFIG_TFABOOT /* PSCI support */ #define CONFIG_ARMV7_PSCI_1_0 #define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE @@ -23,10 +23,6 @@ #define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#ifdef CONFIG_STM32MP1_OPTEE -#define CONFIG_SYS_MEM_TOP_HIDE SZ_32M -#endif /* CONFIG_STM32MP1_OPTEE */ - /* * Console I/O buffer size */ @@ -43,8 +39,14 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +/* + * For booting Linux, use the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ SZ_256M + /* Extend size of kernel image for uncompression */ -#define CONFIG_SYS_BOOTM_LEN SZ_32M +#define CONFIG_SYS_BOOTM_LEN SZ_32M /* SPL support */ #ifdef CONFIG_SPL @@ -59,11 +61,6 @@ #define CONFIG_SPL_STACK (STM32_SYSRAM_BASE + \ STM32_SYSRAM_SIZE) #endif /* #ifdef CONFIG_SPL */ - -#define CONFIG_SYS_MEMTEST_START STM32_DDR_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_64M) -#define CONFIG_SYS_MEMTEST_SCRATCH (CONFIG_SYS_MEMTEST_END + 4) - /*MMC SD*/ #define CONFIG_SYS_MMC_MAX_DEVICE 3 @@ -79,13 +76,6 @@ #define CONFIG_SYS_AUTOLOAD "no" #endif -/* Dynamic MTD partition support */ -#if defined(CONFIG_STM32_QSPI) || defined(CONFIG_NAND_STM32_FMC2) -#define CONFIG_SYS_MTDPARTS_RUNTIME -#endif - -#define CONFIG_SET_DFU_ALT_INFO - #ifdef CONFIG_DM_VIDEO #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_BMP_16BPP @@ -132,7 +122,7 @@ * bootcmd for stm32mp1: * for serial/usb: execute the stm32prog command * for mmc boot (eMMC, SD card), boot only on the same device - * for nand boot, boot with on ubifs partition on nand + * for nand or spi-nand boot, boot with on ubifs partition on UBI partition * for nor boot, use the default order */ #define STM32MP_BOOTCMD "bootcmd_stm32mp=" \ @@ -143,65 +133,14 @@ "run env_check;" \ "if test ${boot_device} = mmc;" \ "then env set boot_targets \"mmc${boot_instance}\"; fi;" \ - "if test ${boot_device} = nand;" \ + "if test ${boot_device} = nand ||" \ + " test ${boot_device} = spi-nand ;" \ "then env set boot_targets ubifs0; fi;" \ "run distro_bootcmd;" \ "fi;\0" #include -#ifdef CONFIG_STM32MP1_OPTEE -/* with OPTEE: define specific MTD partitions = teeh, teed, teex */ -#define STM32MP_MTDPARTS \ - "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),256k(teeh),256k(teed),256k(teex),-(nor_user)\0" \ - "mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),512k(teeh),512k(teed),512k(teex),-(UBI)\0" \ - "mtdparts_spi-nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),"\ - "512k(teeh),512k(teed),512k(teex),-(UBI)\0" - -#else /* CONFIG_STM32MP1_OPTEE */ -#define STM32MP_MTDPARTS \ - "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),-(nor_user)\0" \ - "mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0" \ - "mtdparts_spi-nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0" - -#endif /* CONFIG_STM32MP1_OPTEE */ - -#ifndef CONFIG_SYS_MTDPARTS_RUNTIME -#undef STM32MP_MTDPARTS -#define STM32MP_MTDPARTS -#endif - -#define STM32MP_DFU_ALT_RAM \ - "dfu_alt_info_ram=ram 0=" \ - "uImage ram ${kernel_addr_r} 0x2000000;" \ - "devicetree.dtb ram ${fdt_addr_r} 0x100000;" \ - "uramdisk.image.gz ram ${ramdisk_addr_r} 0x10000000\0" - -#ifdef CONFIG_SET_DFU_ALT_INFO -#define STM32MP_DFU_ALT_INFO \ - "dfu_alt_info_nor0=mtd nor0=" \ - "nor_fsbl1 part 1;nor_fsbl2 part 2;" \ - "nor_ssbl part 3;nor_env part 4\0" \ - "dfu_alt_info_nand0=mtd nand0="\ - "nand_fsbl part 1;nand_ssbl1 part 2;" \ - "nand_ssbl2 part 3;nand_UBI partubi 4\0" \ - "dfu_alt_info_spi-nand0=mtd spi-nand0="\ - "spi-nand_fsbl part 1;spi-nand_ssbl1 part 2;" \ - "spi-nand_ssbl2 part 3;spi-nand_UBI partubi 4\0" \ - "dfu_alt_info_mmc0=mmc 0=" \ - "sdcard_fsbl1 part 0 1;sdcard_fsbl2 part 0 2;" \ - "sdcard_ssbl part 0 3;sdcard_bootfs part 0 4;" \ - "sdcard_vendorfs part 0 5;sdcard_rootfs part 0 6;" \ - "sdcard_userfs part 0 7\0" \ - "dfu_alt_info_mmc1=mmc 1=" \ - "emmc_fsbl1 raw 0x0 0x200 mmcpart 1;" \ - "emmc_fsbl2 raw 0x0 0x200 mmcpart 2;emmc_ssbl part 1 1;" \ - "emmc_bootfs part 1 2;emmc_vendorfs part 1 3;" \ - "emmc_rootfs part 1 4;emmc_userfs part 1 5\0" -#else -#define STM32MP_DFU_ALT_INFO -#endif - /* * memory layout for 32M uncompressed/compressed kernel, * 1M fdt, 1M script, 1M pxe and 1M for splashimage @@ -215,16 +154,11 @@ "pxefile_addr_r=0xc4200000\0" \ "splashimage=0xc4300000\0" \ "ramdisk_addr_r=0xc4400000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ "altbootcmd=run bootcmd\0" \ "env_default=1\0" \ "env_check=if test $env_default -eq 1;"\ " then env set env_default 0;env save;fi\0" \ STM32MP_BOOTCMD \ - STM32MP_MTDPARTS \ - STM32MP_DFU_ALT_RAM \ - STM32MP_DFU_ALT_INFO \ BOOTENV \ "boot_net_usb_start=true\0"