X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fspear-common.h;h=c0eba3721d70d30306f2ea9826d63a19547ac3e2;hb=HEAD;hp=d18b999dda9d33484a4fbf2c33ff19e6fdb2bcfa;hpb=719afeb0b3c60af82f701f122978b935aa6a5217;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
deleted file mode 100644
index d18b999..0000000
--- a/include/configs/spear-common.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2009
- * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
- */
-
-#ifndef _SPEAR_COMMON_H
-#define _SPEAR_COMMON_H
-/*
- * Common configurations used for both spear3xx as well as spear6xx
- */
-
-/* U-Boot Load Address */
-
-/* Ethernet driver configuration */
-#define CONFIG_MII
-#define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
-
-/* USBD driver configuration */
-#if defined(CONFIG_SPEAR_USBTTY)
-#define CONFIG_DW_UDC
-#define CONFIG_USB_DEVICE
-#define CONFIG_USBD_HS
-#define CONFIG_USB_TTY
-
-#define CONFIG_USBD_PRODUCT_NAME		"SPEAr SoC"
-#define CONFIG_USBD_MANUFACTURER		"ST Microelectronics"
-
-#endif
-
-#define CONFIG_EXTRA_ENV_USBTTY			"usbtty=cdc_acm\0"
-
-/* I2C driver configuration */
-#define CONFIG_SYS_I2C
-#if defined(CONFIG_SPEAR600)
-#define CONFIG_SYS_I2C_BASE			0xD0200000
-#elif defined(CONFIG_SPEAR300)
-#define CONFIG_SYS_I2C_BASE			0xD0180000
-#elif defined(CONFIG_SPEAR310)
-#define CONFIG_SYS_I2C_BASE			0xD0180000
-#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_I2C_BASE			0xD0180000
-#endif
-#define CONFIG_SYS_I2C_SPEED			400000
-#define CONFIG_SYS_I2C_SLAVE			0x02
-
-#define CONFIG_I2C_CHIPADDRESS			0x50
-
-/* Timer, HZ specific defines */
-
-/* Flash configuration */
-#if defined(CONFIG_FLASH_PNOR)
-#define CONFIG_SPEAR_EMI
-#else
-#define CONFIG_ST_SMI
-#endif
-
-#if defined(CONFIG_ST_SMI)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS		2
-#define CONFIG_SYS_FLASH_BASE			0xF8000000
-#define CONFIG_SYS_CS1_FLASH_BASE		0xF9000000
-#define CONFIG_SYS_FLASH_BANK_SIZE		0x01000000
-#define CONFIG_SYS_FLASH_ADDR_BASE		{CONFIG_SYS_FLASH_BASE, \
-						CONFIG_SYS_CS1_FLASH_BASE}
-#define CONFIG_SYS_MAX_FLASH_SECT		128
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT		(3 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT		(3 * CONFIG_SYS_HZ)
-
-#endif
-
-/*
- * Serial Configuration (PL011)
- * CONFIG_PL01x_PORTS is defined in specific files
- */
-#define CONFIG_PL011_CLOCK			(48 * 1000 * 1000)
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, \
-						57600, 115200 }
-
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* NAND FLASH Configuration */
-#define CONFIG_SYS_NAND_SELF_INIT
-#define CONFIG_NAND_FSMC
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/*
- * Default Environment Varible definitions
- */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * U-Boot Environment placing definitions.
- */
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-#ifdef CONFIG_ST_SMI
-/*
- * Environment is in serial NOR flash
- */
-#define CONFIG_SYS_MONITOR_LEN			0x00040000
-#define CONFIG_ENV_SECT_SIZE			0x00010000
-#define CONFIG_FSMTDBLK				"/dev/mtdblock3 "
-
-#define CONFIG_BOOTCOMMAND			"bootm 0xf8050000"
-
-#elif defined(CONFIG_SPEAR_EMI)
-/*
- * Environment is in parallel NOR flash
- */
-#define CONFIG_SYS_MONITOR_LEN			0x00060000
-#define CONFIG_ENV_SECT_SIZE			0x00020000
-#define CONFIG_FSMTDBLK				"/dev/mtdblock3 "
-
-#define CONFIG_BOOTCOMMAND			"cp.b 0x50080000 0x1600000 " \
-						"0x4C0000; bootm 0x1600000"
-#endif
-
-#define CONFIG_ENV_ADDR				(CONFIG_SYS_FLASH_BASE + \
-						CONFIG_SYS_MONITOR_LEN)
-#elif defined(CONFIG_ENV_IS_IN_NAND)
-/*
- * Environment is in NAND
- */
-
-#define CONFIG_ENV_OFFSET			0x60000
-#define CONFIG_ENV_RANGE			0x10000
-#define CONFIG_FSMTDBLK				"/dev/mtdblock7 "
-
-#define CONFIG_BOOTCOMMAND			"nand read.jffs2 0x1600000 " \
-						"0x80000 0x4C0000; " \
-						"bootm 0x1600000"
-#endif
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"bootp; "							\
-	"setenv bootargs root=/dev/nfs rw "				\
-	"nfsroot=$(serverip):$(rootpath) "				\
-	"ip=$(ipaddr):$(serverip):$(gatewayip):"			\
-			"$(netmask):$(hostname):$(netdev):off "		\
-			"console=ttyAMA0,115200 $(othbootargs);"	\
-	"bootm; "
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv bootargs root=/dev/ram rw "				\
-		"console=ttyAMA0,115200 $(othbootargs);"		\
-	CONFIG_BOOTCOMMAND
-
-#define CONFIG_ENV_SIZE				0x02000
-#define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_TEXT_BASE
-
-/* Miscellaneous configurable options */
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_BOOT_PARAMS_ADDR			0x00000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_SYS_MEMTEST_START		0x00800000
-#define CONFIG_SYS_MEMTEST_END			0x04000000
-#define CONFIG_SYS_MALLOC_LEN			(1024*1024)
-#define CONFIG_SYS_LOAD_ADDR			0x00800000
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Physical Memory Map */
-#define PHYS_SDRAM_1				0x00000000
-#define PHYS_SDRAM_1_MAXSIZE			0x40000000
-
-#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR		0xD2800000
-#define CONFIG_SYS_INIT_RAM_SIZE		0x2000
-
-#define CONFIG_SYS_INIT_SP_OFFSET		\
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_INIT_SP_ADDR			\
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#endif