X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fspear-common.h;h=85e498dc6687d261656c37ebf75fbdbfeeda85a3;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=349232e1bfd65eb2a84efcdc52579995bba1d634;hpb=a0e80c97c9ba1409c2370f6c8b2a4d6a48cdb15c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 349232e..85e498d 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2009
  * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _SPEAR_COMMON_H
@@ -12,10 +11,8 @@
  */
 
 /* U-Boot Load Address */
-#define CONFIG_SYS_TEXT_BASE			0x00700000
 
 /* Ethernet driver configuration */
-#define CONFIG_MII
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 
 /* USBD driver configuration */
@@ -76,9 +73,7 @@
  * Serial Configuration (PL011)
  * CONFIG_PL01x_PORTS is defined in specific files
  */
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK			(48 * 1000 * 1000)
-#define CONFIG_CONS_INDEX			0
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, \
 						57600, 115200 }
 
@@ -86,8 +81,6 @@
 
 /* NAND FLASH Configuration */
 #define CONFIG_SYS_NAND_SELF_INIT
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 #define CONFIG_NAND_FSMC
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
@@ -106,7 +99,6 @@
  * Environment is in serial NOR flash
  */
 #define CONFIG_SYS_MONITOR_LEN			0x00040000
-#define CONFIG_ENV_SECT_SIZE			0x00010000
 #define CONFIG_FSMTDBLK				"/dev/mtdblock3 "
 
 #define CONFIG_BOOTCOMMAND			"bootm 0xf8050000"
@@ -116,21 +108,16 @@
  * Environment is in parallel NOR flash
  */
 #define CONFIG_SYS_MONITOR_LEN			0x00060000
-#define CONFIG_ENV_SECT_SIZE			0x00020000
 #define CONFIG_FSMTDBLK				"/dev/mtdblock3 "
 
 #define CONFIG_BOOTCOMMAND			"cp.b 0x50080000 0x1600000 " \
 						"0x4C0000; bootm 0x1600000"
 #endif
-
-#define CONFIG_ENV_ADDR				(CONFIG_SYS_FLASH_BASE + \
-						CONFIG_SYS_MONITOR_LEN)
 #elif defined(CONFIG_ENV_IS_IN_NAND)
 /*
  * Environment is in NAND
  */
 
-#define CONFIG_ENV_OFFSET			0x60000
 #define CONFIG_ENV_RANGE			0x10000
 #define CONFIG_FSMTDBLK				"/dev/mtdblock7 "
 
@@ -153,27 +140,21 @@
 		"console=ttyAMA0,115200 $(othbootargs);"		\
 	CONFIG_BOOTCOMMAND
 
-#define CONFIG_ENV_SIZE				0x02000
 #define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_TEXT_BASE
 
 /* Miscellaneous configurable options */
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_BOOT_PARAMS_ADDR			0x00000100
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_MEMTEST_START		0x00800000
 #define CONFIG_SYS_MEMTEST_END			0x04000000
 #define CONFIG_SYS_MALLOC_LEN			(1024*1024)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LOAD_ADDR			0x00800000
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS			1
 #define PHYS_SDRAM_1				0x00000000
 #define PHYS_SDRAM_1_MAXSIZE			0x40000000