X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fspear-common.h;h=77b80df2a63e1e8bcac4ea5aa4836726fec27c1e;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=c0eba3721d70d30306f2ea9826d63a19547ac3e2;hpb=eeb72e67619b98d2502fe634a3a5d9953de92ad0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index c0eba37..77b80df 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -11,14 +11,11 @@
  * Common configurations used for both spear3xx as well as spear6xx
  */
 
-/* U-boot Load Address */
+/* U-Boot Load Address */
 #define CONFIG_SYS_TEXT_BASE			0x00700000
 
 /* Ethernet driver configuration */
 #define CONFIG_MII
-#define CONFIG_DESIGNWARE_ETH
-#define CONFIG_NET_MULTI
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 #define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */
 
@@ -37,8 +34,7 @@
 #define CONFIG_EXTRA_ENV_USBTTY			"usbtty=cdc_acm\0"
 
 /* I2C driver configuration */
-#define CONFIG_HARD_I2C
-#define CONFIG_DW_I2C
+#define CONFIG_SYS_I2C
 #if defined(CONFIG_SPEAR600)
 #define CONFIG_SYS_I2C_BASE			0xD0200000
 #elif defined(CONFIG_SPEAR300)
@@ -97,34 +93,17 @@
 #define CONFIG_NAND_FSMC
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_QUIET_TEST
 
 /*
  * Command support defines
  */
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_RUN
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <config_cmd_default.h>
 
 /*
  * Default Environment Varible definitions
  */
-#if defined(CONFIG_SPEAR_USBTTY)
-#define CONFIG_BOOTDELAY			-1
-#else
-#define CONFIG_BOOTDELAY			1
-#endif
-
 #define CONFIG_ENV_OVERWRITE
 
 /*
@@ -188,30 +167,20 @@
 		"console=ttyAMA0,115200 $(othbootargs);"		\
 	CONFIG_BOOTCOMMAND
 
-
 #define CONFIG_ENV_SIZE				0x02000
 #define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_TEXT_BASE
 
 /* Miscellaneous configurable options */
 #define CONFIG_ARCH_CPU_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_BOOT_PARAMS_ADDR			0x00000100
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_MISC_INIT_R
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_STOP_STR		" "
-#define CONFIG_AUTOBOOT_PROMPT			\
-		"Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
 
 #define CONFIG_SYS_MEMTEST_START		0x00800000
 #define CONFIG_SYS_MEMTEST_END			0x04000000
 #define CONFIG_SYS_MALLOC_LEN			(1024*1024)
-#define CONFIG_IDENT_STRING			"-SPEAr"
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT			"u-boot> "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_CBSIZE			256
 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
@@ -219,7 +188,6 @@
 #define CONFIG_SYS_MAXARGS			16
 #define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LOAD_ADDR			0x00800000
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO