X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fspear-common.h;h=409cf54172584e5eee5c1da3fd8f6da9a82a1aa1;hb=f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a;hp=23f7ad77b61e9da6c7c675b34e730a31f93f8c80;hpb=f232950f82d11d411ad29663d98851ac02fd29fb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 23f7ad7..409cf54 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -11,17 +11,16 @@
  * Common configurations used for both spear3xx as well as spear6xx
  */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* U-boot Load Address */
 #define CONFIG_SYS_TEXT_BASE			0x00700000
 
 /* Ethernet driver configuration */
 #define CONFIG_MII
-#define CONFIG_DESIGNWARE_ETH
-#define CONFIG_DW_SEARCH_PHY
-#define CONFIG_DW0_PHY				1
 #define CONFIG_NET_MULTI
+#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
-#define CONFIG_DW_AUTONEG
 #define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */
 
 /* USBD driver configuration */
@@ -39,8 +38,17 @@
 #define CONFIG_EXTRA_ENV_USBTTY			"usbtty=cdc_acm\0"
 
 /* I2C driver configuration */
-#define CONFIG_HARD_I2C
-#define CONFIG_DW_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DW
+#if defined(CONFIG_SPEAR600)
+#define CONFIG_SYS_I2C_BASE			0xD0200000
+#elif defined(CONFIG_SPEAR300)
+#define CONFIG_SYS_I2C_BASE			0xD0180000
+#elif defined(CONFIG_SPEAR310)
+#define CONFIG_SYS_I2C_BASE			0xD0180000
+#elif defined(CONFIG_SPEAR320)
+#define CONFIG_SYS_I2C_BASE			0xD0180000
+#endif
 #define CONFIG_SYS_I2C_SPEED			400000
 #define CONFIG_SYS_I2C_SLAVE			0x02