X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocrates.h;h=c697f63162adcb5320f8dab8fbabb3abc2580fe8;hb=529fb062081e100faae6dc0d163a548b8528ff24;hp=fd590e4e122d0fa0f34af30d7e38228fb07833d0;hpb=215ab45a67672a7c1ceb347f7b74c94323415222;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index fd590e4..c697f63 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -17,21 +17,13 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* new uImage format support */
-#define CONFIG_FIT		1
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
-
 /* High Level Configuration Options */
 #define CONFIG_BOOKE		1	/* BOOKE			*/
 #define CONFIG_E500		1	/* BOOKE e500 family		*/
-#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41		*/
-#define CONFIG_MPC8544		1
 #define CONFIG_SOCRATES		1
 
 #define	CONFIG_SYS_TEXT_BASE	0xfff80000
 
-#define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
@@ -174,18 +166,12 @@
 #define CONFIG_SYS_BR2_PRELIM		0xc80018a1	/* UPMB, 32-bit	*/
 #define CONFIG_SYS_OR2_PRELIM		0xfc000000	/* 64 MB	*/
 
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_MB862xx
 #define CONFIG_VIDEO_MB862xx_ACCEL
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
 #define VIDEO_FB_16BPP_PIXEL_SWAP
 #define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* decompressed img */
@@ -198,7 +184,6 @@
 /* Serial Port */
 
 #define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -213,8 +198,6 @@
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support */
-#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
-
 
 /*
  * I2C
@@ -260,11 +243,9 @@
 #define CONFIG_SYS_PCI1_IO_SIZE	0x01000000	/* 16M			*/
 
 #if defined(CONFIG_PCI)
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 #endif	/* CONFIG_PCI */
 
-
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_TSEC1	1
 #define CONFIG_TSEC1_NAME	"TSEC0"
@@ -302,7 +283,6 @@
 
 #define	CONFIG_TIMESTAMP		/* Print image info with ts	*/
 
-
 /*
  * BOOTP options
  */
@@ -311,25 +291,14 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BMP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DTT
 #undef CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_MII
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
@@ -365,10 +334,8 @@
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
 #endif
 
-
 #define CONFIG_LOADADDR	 200000		/* default addr for tftp & bootm*/
 
-#define CONFIG_BOOTDELAY 1		/* -1 disables auto-boot	*/
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Welcome on the ABB Socrates Board;" \
@@ -433,8 +400,6 @@
 #define CONFIG_BOOTCOMMAND	"run boot_nor"
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
 
 /* USB support */
 #define CONFIG_USB_OHCI_NEW		1
@@ -445,6 +410,5 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"ohci_pci"
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	1
 #define CONFIG_DOS_PARTITION		1
-#define CONFIG_USB_STORAGE		1
 
 #endif	/* __CONFIG_H */