X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocrates.h;h=9fa8917a9bc0b25956114fdba3ba79273bf71969;hb=d01806a8fcbdaedcc67cead56ece572021d97ab7;hp=1bc520384ccaf0f487fbd88af12c5a3ff51c0104;hpb=43ade93bdb0c8bd57382be810a05b3793749ce85;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 1bc5203..9fa8917 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2008 * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com. @@ -6,8 +7,6 @@ * Copyright 2004 Freescale Semiconductor. * (C) Copyright 2002,2003 Motorola,Inc. * Xianghua Xiao - * - * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -20,15 +19,8 @@ /* High Level Configuration Options */ #define CONFIG_SOCRATES 1 -#define CONFIG_SYS_TEXT_BASE 0xfff80000 - #define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_TSEC_ENET /* tsec ethernet support */ - -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */ - /* * Only possible on E500 Version 2 or newer cores. */ @@ -117,9 +109,6 @@ #define CONFIG_SYS_BR1_PRELIM 0xfc001001 /* port size 16bit */ #define CONFIG_SYS_OR1_PRELIM 0xfe000030 /* 32MB Flash */ -#define CONFIG_SYS_FLASH_CFI /* flash is CFI compat. */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver*/ - #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ #undef CONFIG_SYS_FLASH_CHECKSUM @@ -152,7 +141,6 @@ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_FPGA_BASE + 0x70) #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_CMD_NAND /* LIME GDC */ #define CONFIG_SYS_LIME_BASE 0xc8000000 @@ -177,7 +165,6 @@ /* Serial Port */ -#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) @@ -185,14 +172,9 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -#define CONFIG_BAUDRATE 115200 - #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ - /* * I2C */ @@ -212,13 +194,6 @@ /* I2C W83782G HW-Monitoring IC */ #define CONFIG_SYS_I2C_W83782G_ADDR 0x28 /* W83782G address */ -/* I2C temp sensor */ -/* Socrates uses Maxim's DS75, which is compatible with LM75 */ -#define CONFIG_DTT_LM75 1 -#define CONFIG_DTT_SENSORS {4} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 125 -#define CONFIG_SYS_DTT_LOW_TEMP -55 -#define CONFIG_SYS_DTT_HYSTERESIS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* @@ -240,7 +215,6 @@ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif /* CONFIG_PCI */ -#define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_TSEC1 1 #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC3 1 @@ -257,7 +231,6 @@ /* Options are: TSEC[0,1] */ #define CONFIG_ETHPRIME "TSEC0" -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 @@ -265,7 +238,6 @@ /* * Environment */ -#define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE 0x4000 @@ -281,42 +253,14 @@ * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_BMP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif #undef CONFIG_WATCHDOG /* watchdog disabled */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buf Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -335,8 +279,6 @@ "echo Welcome on the ABB Socrates Board;" \ "echo" -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consdev=ttyS0\0" \