X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocrates.h;h=81f607d7d91e56f1be5bebbb2fdd997ab64a57d5;hb=553f09823cced77296825f615f00321d932bf914;hp=88be34914eaeefd0c3f3fd066c6ce0fa9143d1f1;hpb=2e6e1772c0e34871769be4aef79748fe3e47d953;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 88be349..81f607d 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -45,6 +45,8 @@
 #define CONFIG_MPC8544		1
 #define CONFIG_SOCRATES		1
 
+#define	CONFIG_SYS_TEXT_BASE	0xfff80000
+
 #define CONFIG_PCI
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
@@ -159,7 +161,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms)	*/
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor	*/
 
 #define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg	*/
 #define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg		*/
@@ -168,10 +170,10 @@
 
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End used area in RAM	*/
+#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size used area in RAM*/
 
 #define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN		(384 * 1024)	/* Reserve 384KiB for Mon */
@@ -388,14 +390,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/