X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocfpga_stratix10_socdk.h;h=09b46ba013737b843edd16ab6d322c69420fae8a;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=90ad8172e22baf2c4b161c65b5f7d28f66fff360;hpb=898c40c0d6f9e53dafcfdf6f870190faef6e088b;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h index 90ad817..09b46ba 100644 --- a/include/configs/socfpga_stratix10_socdk.h +++ b/include/configs/socfpga_stratix10_socdk.h @@ -1,210 +1,12 @@ /* SPDX-License-Identifier: GPL-2.0 * - * Copyright (C) 2017-2018 Intel Corporation + * Copyright (C) 2017-2019 Intel Corporation * */ #ifndef __CONFIG_SOCFGPA_STRATIX10_H__ #define __CONFIG_SOCFGPA_STRATIX10_H__ -#include -#include +#include -/* - * U-Boot general configurations - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_LOADADDR 0x2000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_REMAKE_ELF -/* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */ -#define CPU_RELEASE_ADDR 0xFFD12210 -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_MEM_RESERVE_SECURE 0 /* using OCRAM, not DDR */ - -/* - * U-Boot console configurations - */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* Extend size of kernel image for uncompression */ -#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024) - -/* - * U-Boot run time memory configurations - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x40000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR \ - + CONFIG_SYS_INIT_RAM_SIZE \ - - S10_HANDOFF_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_SP_ADDR) -#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) - -/* - * U-Boot environment configurations - */ -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ -#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ - -/* - * QSPI support - */ - #ifdef CONFIG_CADENCE_QSPI -/* Enable it if you want to use dual-stacked mode */ -/*#define CONFIG_QSPI_RBF_ADDR 0x720000*/ - -/* Flash device info */ - -/*#define CONFIG_ENV_IS_IN_SPI_FLASH*/ -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH -#undef CONFIG_ENV_OFFSET -#undef CONFIG_ENV_SIZE -#define CONFIG_ENV_OFFSET 0x710000 -#define CONFIG_ENV_SIZE (4 * 1024) -#define CONFIG_ENV_SECT_SIZE (4 * 1024) -#endif /* CONFIG_ENV_IS_IN_SPI_FLASH */ - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nor0=ff705000.spi.0" -#endif /* CONFIG_SPL_BUILD */ - -#ifndef __ASSEMBLY__ -unsigned int cm_get_qspi_controller_clk_hz(void); -#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() -#endif - -#endif /* CONFIG_CADENCE_QSPI */ - -/* - * Boot arguments passed to the boot command. The value of - * CONFIG_BOOTARGS goes into the environment value "bootargs". - * Do note the value will override also the chosen node in FDT blob. - */ -#define CONFIG_BOOTARGS "earlycon" -#define CONFIG_BOOTCOMMAND "run fatscript; run mmcload;run linux_qspi_enable;" \ - "run mmcboot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "bootfile=Image\0" \ - "fdt_addr=8000000\0" \ - "fdtimage=socfpga_stratix10_socdk.dtb\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "booti ${loadaddr} - ${fdt_addr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootfile};" \ - "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ - "linux_qspi_enable=if sf probe; then " \ - "echo Enabling QSPI at Linux DTB...;" \ - "fdt addr ${fdt_addr}; fdt resize;" \ - "fdt set /soc/spi@ff8d2000 status okay;" \ - "fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency " \ - " ${qspi_clock}; fi; \0" \ - "scriptaddr=0x02100000\0" \ - "scriptfile=u-boot.scr\0" \ - "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \ - "then source ${scriptaddr}; fi\0" \ - "socfpga_legacy_reset_compat=1\0" - -/* - * Generic Interrupt Controller Definitions - */ -#define CONFIG_GICV2 - -/* - * External memory configurations - */ -#define PHYS_SDRAM_1 0x0 -#define PHYS_SDRAM_1_SIZE (1 * 1024 * 1024 * 1024) -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_MEMTEST_START 0 -#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE - 0x200000 - -/* - * Serial / UART configurations - */ -#define CONFIG_SYS_NS16550_CLK 100000000 -#define CONFIG_SYS_NS16550_MEM32 - -/* - * Timer & watchdog configurations - */ -#define COUNTER_FREQUENCY 400000000 - -/* - * SDMMC configurations - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 -#endif -/* - * Flash configurations - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -/* Ethernet on SoC (EMAC) */ -#if defined(CONFIG_CMD_NET) -#define CONFIG_DW_ALTDESCRIPTOR -#endif /* CONFIG_CMD_NET */ - -/* - * L4 Watchdog - */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_HW_WATCHDOG -#define CONFIG_DESIGNWARE_WATCHDOG -#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS -#ifndef __ASSEMBLY__ -unsigned int cm_get_l4_sys_free_clk_hz(void); -#define CONFIG_DW_WDT_CLOCK_KHZ (cm_get_l4_sys_free_clk_hz() / 1000) -#endif -#define CONFIG_WATCHDOG_TIMEOUT_MSECS 3000 -#endif - -/* - * SPL memory layout - * - * On chip RAM - * 0xFFE0_0000 ...... Start of OCRAM - * SPL code, rwdata - * empty space - * 0xFFEx_xxxx ...... Top of stack (grows down) - * 0xFFEy_yyyy ...... Global Data - * 0xFFEz_zzzz ...... Malloc prior relocation (size CONFIG_SYS_MALLOC_F_LEN) - * 0xFFE3_F000 ...... Hardware handdoff blob (size 4KB) - * 0xFFE3_FFFF ...... End of OCRAM - * - * SDRAM - * 0x0000_0000 ...... Start of SDRAM_1 - * unused / empty space for image loading - * Size 64MB ...... MALLOC (size CONFIG_SYS_SPL_MALLOC_SIZE) - * Size 1MB ...... BSS (size CONFIG_SPL_BSS_MAX_SIZE) - * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB) - * - */ -#define CONFIG_SPL_TARGET "spl/u-boot-spl.hex" -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SPL_BSS_START_ADDR (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE \ - - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR \ - - CONFIG_SYS_SPL_MALLOC_SIZE) -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x3C00000 - -/* SPL SDMMC boot support */ -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#endif /* __CONFIG_H */ +#endif /* __CONFIG_SOCFGPA_STRATIX10_H__ */