X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocfpga_sr1500.h;h=8c9069c923ded146e344d20fb39a296ed8dc001a;hb=fee626c4498b032c19cadc2633cea40badc74625;hp=286e746a1496a2903390734d73feef9347811c1f;hpb=6beacfcff81bdc04c10a440971b0fb683ee57534;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h
index 286e746..8c9069c 100644
--- a/include/configs/socfpga_sr1500.h
+++ b/include/configs/socfpga_sr1500.h
@@ -8,24 +8,14 @@
 
 #include <asm/arch/base_addr_ac5.h>
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-
 #define CONFIG_HW_WATCHDOG
 
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB on SR1500 */
 
 /* Booting Linux */
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#define CONFIG_BOOTCOMMAND	"run mmcload; run mmcboot"
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
 
 /* Ethernet on SoC (EMAC) */
 #define CONFIG_PHY_INTERFACE_MODE	PHY_INTERFACE_MODE_RGMII
@@ -33,33 +23,7 @@
 #define CONFIG_PHY_MARVELL
 #define PHY_ANEG_TIMEOUT	8000
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"verify=n\0" \
-	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
-		"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"bootimage=zImage\0" \
-	"fdt_addr=100\0" \
-	"fdtimage=socfpga.dtb\0" \
-		"fsloadcmd=ext2load\0" \
-	"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"mmcroot=/dev/mmcblk0p2\0" \
-	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${mmcroot} rw rootwait;" \
-		"bootz ${loadaddr} - ${fdt_addr}\0" \
-	"mmcload=mmc rescan;" \
-		"load mmc 0:1 ${loadaddr} ${bootimage};" \
-		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-	"qspiload=sf probe && mtdparts default && run ubiload\0" \
-	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
-		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
-		"bootz ${loadaddr} - ${fdt_addr}\0" \
-	"ubiload=ubi part UBI && ubifsmount ubi0 && " \
-		"ubifsload ${loadaddr} /boot/${bootimage} && " \
-		"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
-
 /* Environment */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 
 /* Enable SPI NOR flash reset, needed for SPI booting */
 #define CONFIG_SPI_N25Q256A_RESET
@@ -67,7 +31,6 @@
 /*
  * Bootcounter
  */
-#define CONFIG_BOOTCOUNT_LIMIT
 /* last 2 lwords in OCRAM */
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0xfffffff8
 #define CONFIG_SYS_BOOTCOUNT_BE