X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocfpga_sr1500.h;h=432144cb40ce0170f8ab6f0eef9ce97ba14a3406;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=8879817b3020ed503eac0f5ab4ee6d2d178b9524;hpb=d884c58f0c7b997fd7f04e360d86717e75de74b1;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h
index 8879817..432144c 100644
--- a/include/configs/socfpga_sr1500.h
+++ b/include/configs/socfpga_sr1500.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __CONFIG_SOCFPGA_SR1500_H__
 #define __CONFIG_SOCFPGA_SR1500_H__
@@ -11,48 +10,15 @@
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB on SR1500 */
 
-/* Booting Linux */
-#define CONFIG_LOADADDR		0x01000000
-#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-
 /* Ethernet on SoC (EMAC) */
 #define CONFIG_PHY_INTERFACE_MODE	PHY_INTERFACE_MODE_RGMII
 /* The PHY is autodetected, so no MII PHY address is needed here */
-#define CONFIG_PHY_MARVELL
 #define PHY_ANEG_TIMEOUT	8000
 
-/* Environment */
-
 /* Enable SPI NOR flash reset, needed for SPI booting */
 #define CONFIG_SPI_N25Q256A_RESET
 
-/*
- * Bootcounter
- */
-/* last 2 lwords in OCRAM */
-#define CONFIG_SYS_BOOTCOUNT_ADDR	0xfffffff8
-#define CONFIG_SYS_BOOTCOUNT_BE
-
 /* Environment setting for SPI flash */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
-#define CONFIG_ENV_SIZE		(16 * 1024)
-#define CONFIG_ENV_OFFSET	0x000e0000
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SPI_BUS	0
-#define CONFIG_ENV_SPI_CS	0
-#define CONFIG_ENV_SPI_MODE	SPI_MODE_3
-#define CONFIG_ENV_SPI_MAX_HZ	100000000	/* Use max of 100MHz */
-#define CONFIG_SF_DEFAULT_SPEED	100000000
-
-/*
- * The QSPI NOR flash layout on SR1500:
- *
- * 0000.0000 - 0003.ffff: SPL (4 times)
- * 0004.0000 - 000d.ffff: U-Boot
- * 000e.0000 - 000e.ffff: env1
- * 000f.0000 - 000f.ffff: env2
- */
 
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>