X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocfpga_sockit.h;h=972999949a03734ab4523380cfc64b2dcbc250b0;hb=19ea606109135c3d9892d86e1b1c2a8fb551cc1b;hp=5bcee05c72926e933f884ed143a2457c1b9b9539;hpb=2a8696dfc2c6547c41836ceda573ad4548cba357;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h
index 5bcee05..9729999 100644
--- a/include/configs/socfpga_sockit.h
+++ b/include/configs/socfpga_sockit.h
@@ -1,93 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __CONFIG_TERASIC_SOCKIT_H__
 #define __CONFIG_TERASIC_SOCKIT_H__
 
 #include <asm/arch/base_addr_ac5.h>
 
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-#define CONFIG_HW_WATCHDOG
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DFU
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_USB_MASS_STORAGE
-
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB on SoCDK */
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTFILE		"fitImage"
-#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_BOOTCOMMAND	"run ramboot"
-#else
-#define CONFIG_BOOTCOMMAND	"run mmcload; run mmcboot"
-#endif
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* Ethernet on SoC (EMAC) */
-#if defined(CONFIG_CMD_NET)
-
-/* PHY */
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9021
-#define CONFIG_KSZ9021_CLK_SKEW_ENV	"micrel-ksz9021-clk-skew"
-#define CONFIG_KSZ9021_CLK_SKEW_VAL	0xf0f0
-#define CONFIG_KSZ9021_DATA_SKEW_ENV	"micrel-ksz9021-data-skew"
-#define CONFIG_KSZ9021_DATA_SKEW_VAL	0x0
-
-#endif
-
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
-#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
-#endif
-#define CONFIG_G_DNL_MANUFACTURER      "Terasic"
-
-/* Extra Environment */
-#define CONFIG_HOSTNAME		socfpga_sockit
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"verify=n\0" \
-	"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
-		"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"bootimage=zImage\0" \
-	"fdt_addr=100\0" \
-	"fdtimage=socfpga.dtb\0" \
-	"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"mmcroot=/dev/mmcblk0p2\0" \
-	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${mmcroot} rw rootwait;" \
-		"bootz ${loadaddr} - ${fdt_addr}\0" \
-	"mmcload=mmc rescan;" \
-		"load mmc 0:1 ${loadaddr} ${bootimage};" \
-		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>