X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocfpga_mcvevk.h;h=d1b31c4cfa3550760f4400bf241de2cd3ac30d1c;hb=bb597c0eeb7ee2f6e983577d993c76a30dd3c2b4;hp=c5b4b4ca9d399ab1da5c57caaa398972e8634f54;hpb=d88995a82bb111de2035b90aa17e92c2c6b00ede;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h
index c5b4b4c..d1b31c4 100644
--- a/include/configs/socfpga_mcvevk.h
+++ b/include/configs/socfpga_mcvevk.h
@@ -6,7 +6,7 @@
 #ifndef __CONFIG_DENX_MCVEVK_H__
 #define __CONFIG_DENX_MCVEVK_H__
 
-#include <asm/arch/socfpga_base_addrs.h>
+#include <asm/arch/base_addr_ac5.h>
 
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
@@ -14,28 +14,10 @@
 #define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
 
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DFU
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_USB_MASS_STORAGE
-
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB on MCV */
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTFILE		"fitImage"
 #define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
 #define CONFIG_PREBOOT		"run try_bootscript"
@@ -43,15 +25,11 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
-#endif
-#define CONFIG_G_DNL_MANUFACTURER	"DENX"
+/* Environment is in MMC */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_IS_IN_MMC
 
 /* Extra Environment */
-#define CONFIG_HOSTNAME			mcvevk
-
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"consdev=ttyS0\0"						\
 	"baudrate=115200\0"						\
@@ -61,7 +39,7 @@
 	"netdev=eth0\0"							\
 	"hostname=mcvevk\0"						\
 	"kernel_addr_r=0x10000000\0"					\
-	"update_filename=u-boot-with-spl-dtb.sfp\0"			\
+	"update_filename=u-boot-with-spl.sfp\0"				\
 	"update_sd_offset=0x800\0"					\
 	"update_sd="		/* Update the SD firmware partition */	\
 		"if mmc rescan ; then "					\