X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocfpga_common.h;h=4a7da76e51e611b840adf4114e959d0aa343aaa4;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=ed3aac7f3acb61787432da0772c30137acdf9113;hpb=6eecaf5d0f6b9a500dd5798f1f2bc8296bcfe158;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index ed3aac7..4a7da76 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -8,31 +8,17 @@
 #include <linux/stringify.h>
 
 /*
- * High level configuration
- */
-#define CONFIG_CLOCKS
-
-#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
-
-/*
  * Memory configurations
  */
 #define PHYS_SDRAM_1			0x0
 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
 #define CONFIG_SYS_INIT_RAM_SIZE	SOCFPGA_PHYS_OCRAM_SIZE
-#define CONFIG_SPL_PAD_TO		0x10000
 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFE00000
-#define CONFIG_SPL_PAD_TO		0x40000
 /* SPL memory allocation configuration, this is for FAT implementation */
-#ifndef CONFIG_SYS_SPL_MALLOC_SIZE
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x10000
-#endif
 #define CONFIG_SYS_INIT_RAM_SIZE	(SOCFPGA_PHYS_OCRAM_SIZE - \
 					 CONFIG_SYS_SPL_MALLOC_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE)
 #endif
 
 /*
@@ -44,10 +30,6 @@
 #if ((CONFIG_SYS_BOOTCOUNT_ADDR > CONFIG_SYS_INIT_RAM_ADDR) &&	\
      (CONFIG_SYS_BOOTCOUNT_ADDR < (CONFIG_SYS_INIT_RAM_ADDR +	\
 				   CONFIG_SYS_INIT_RAM_SIZE)))
-#define CONFIG_SPL_STACK		CONFIG_SYS_BOOTCOUNT_ADDR
-#else
-#define CONFIG_SPL_STACK			\
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
 #endif
 
 /*
@@ -55,22 +37,13 @@
  * phase of U-Boot, too. This prevents overwriting SPL data if stack/heap usage
  * in U-Boot pre-reloc is higher than in SPL.
  */
-#if defined(CONFIG_SPL_STACK_R_ADDR) && CONFIG_SPL_STACK_R_ADDR
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SPL_STACK_R_ADDR
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SPL_STACK
-#endif
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /*
  * U-Boot general configurations
  */
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
 						/* Print buffer size */
-#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-						/* Boot argument buffer size */
 
 /*
  * Cache
@@ -79,20 +52,6 @@
 #define CONFIG_SYS_PL310_BASE		SOCFPGA_MPUL2_ADDRESS
 
 /*
- * Ethernet on SoC (EMAC)
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_DW_ALTDESCRIPTOR
-#endif
-
-/*
- * FPGA Driver
- */
-#ifdef CONFIG_CMD_FPGA
-#define CONFIG_FPGA_COUNT		1
-#endif
-
-/*
  * L4 OSC1 Timer 0
  */
 #ifndef CONFIG_TIMER
@@ -107,7 +66,6 @@
 /*
  * L4 Watchdog
  */
-#define CONFIG_DW_WDT_BASE		SOCFPGA_L4WD0_ADDRESS
 #define CONFIG_DW_WDT_CLOCK_KHZ		25000
 
 /*
@@ -123,23 +81,12 @@
  * NAND Support
  */
 #ifdef CONFIG_NAND_DENALI
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_REGS_BASE	SOCFPGA_NANDREGS_ADDRESS
 #define CONFIG_SYS_NAND_DATA_BASE	SOCFPGA_NANDDATA_ADDRESS
 #endif
 
 /*
- * QSPI support
- */
-/* QSPI reference clock */
-#ifndef __ASSEMBLY__
-unsigned int cm_get_qspi_controller_clk_hz(void);
-#define CONFIG_CQSPI_REF_CLK		cm_get_qspi_controller_clk_hz()
-#endif
-
-/*
  * USB
  */
 
@@ -180,31 +127,10 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
  * 0xFFEz_zzzz ...... Malloc area (grows up to top)
  * 0xFFE3_FFFF ...... End of SRAM (top)
  */
-#ifndef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_INIT_RAM_SIZE
-#endif
-
-/* SPL SDMMC boot support */
-#ifdef CONFIG_SPL_MMC
-#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-#endif
-#else
-#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION	1
-#endif
-#endif
 
 /* SPL QSPI boot support */
 
 /* SPL NAND boot support */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x100000
-#endif
-#endif
 
 /* Extra Environment */
 #ifndef CONFIG_SPL_BUILD