X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsnapper9g45.h;h=24bbea7d03b51c9bab71fb6366e92f43633b0f85;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=4e0b9b12525791754527addad416110fc4e7cf2c;hpb=5cafcbab580bac6c7f44ca4a164c422b7e1ecf20;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h
index 4e0b9b1..24bbea7 100644
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Bluewater Systems Snapper 9G45 module
  *
  * (C) Copyright 2011 Bluewater Systems
  *   Author: Andre Renaud <andre@bluewatersys.com>
  *   Author: Ryan Mallon <ryan@bluewatersys.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,8 +14,6 @@
 #include <asm/hardware.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SYS_TEXT_BASE		0x73f00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
@@ -28,19 +25,14 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS6
 #define CONFIG_SYS_SDRAM_SIZE		(128 * 1024 * 1024) /* 64MB */
 #define CONFIG_SYS_INIT_SP_ADDR		(ATMEL_BASE_SRAM + 0x1000 - \
 					 GENERATED_GBL_DATA_SIZE)
 
 /* Mem test settings */
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + (1024 * 1024))
 
 /* NAND Flash */
-#define CONFIG_NAND_ATMEL
-#define CONFIG_ATMEL_NAND_HWECC
 #define CONFIG_SYS_NAND_ECC_BASE	ATMEL_BASE_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
@@ -52,7 +44,6 @@
 
 /* Ethernet */
 #define CONFIG_MACB
-#define CONFIG_PHYLIB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R
@@ -60,9 +51,6 @@
 #define CONFIG_TFTP_PORT
 #define CONFIG_TFTP_TSIZE
 
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-
 /* MMC */
 #define CONFIG_GENERIC_ATMEL_MCI
 
@@ -70,28 +58,18 @@
 #define CONFIG_ATMEL_LCD
 #define CONFIG_GURNARD_SPLASH
 
-#define CONFIG_ATMEL_SPI
-
 /* GPIOs and IO expander */
 #define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP		1
 
 /* UARTs/Serial console */
-#define CONFIG_ATMEL_USART
 
 /* Boot options */
 #define CONFIG_SYS_LOAD_ADDR		0x23000000
 
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* Environment settings */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		(512 << 10)
-#define CONFIG_ENV_SIZE			(256 << 10)
 #define CONFIG_ENV_OVERWRITE
 
 #define	CONFIG_EXTRA_ENV_SETTINGS	\
@@ -115,24 +93,8 @@
 	"altbootcmd=run boot_mmc ; run boot_usb ; run boot_safe ; run boot_working\0"
 
 /* Console settings */
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +		\
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
 
 /* U-Boot memory settings */
 #define CONFIG_SYS_MALLOC_LEN		(1 << 20)
 
-/* Command line configuration */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_CACHE
-
 #endif /* __CONFIG_H */