X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsnapper9260.h;h=b0408a559252ddcb4efafe04ef62ff21108f15e3;hb=e4b91f085d4259f187052ff724c80af38fc11b18;hp=bff49b1b07264082e34027d01b719837f799fe49;hpb=78d1e1d0a157c8b48ea19be6170b992745d30f38;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index bff49b1..b0408a5 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Bluewater Systems Snapper 9260 and 9G20 modules
  *
  * (C) Copyright 2011 Bluewater Systems
  *   Author: Andre Renaud <andre@bluewatersys.com>
  *   Author: Ryan Mallon <ryan@bluewatersys.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,23 +14,18 @@
 #include <asm/hardware.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SYS_TEXT_BASE		0x21f00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 
 /* CPU */
-#define CONFIG_ARCH_CPU_INIT
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_DISPLAY_CPUINFO
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024) /* 64MB */
 #define CONFIG_SYS_INIT_SP_ADDR		(ATMEL_BASE_SRAM1 + 0x1000 - \
@@ -42,8 +36,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + (1024 * 1024))
 
 /* NAND Flash */
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -65,12 +57,10 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	ATMEL_UHP_BASE
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9260"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
 
 /* GPIOs and IO expander */
 #define CONFIG_ATMEL_LEGACY
@@ -86,7 +76,6 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 #endif
-#define CONFIG_BAUDRATE			115200
 
 /* I2C - Bit-bashed */
 #define CONFIG_SYS_I2C
@@ -117,38 +106,15 @@
 
 /* Boot options */
 #define CONFIG_SYS_LOAD_ADDR		0x23000000
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* Environment settings */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		(512 << 10)
-#define CONFIG_ENV_SIZE			(256 << 10)
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BOOTARGS			"console=ttyS0,115200 ip=any"
 
 /* Console settings */
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +		\
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
 
 /* U-Boot memory settings */
 #define CONFIG_SYS_MALLOC_LEN		(1 << 20)
 
-/* Command line configuration */
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
-
 #endif /* __CONFIG_H */