X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsnapper9260.h;h=6ff21b921687cccf9d98e90baa466a2cac25a485;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=7c2c5fb6ca67ef3ebc4b23fcb6661c7c07307f93;hpb=79b8d3c285f4f1c2ee4b27367f2ca3ecb76ed9ce;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 7c2c5fb..6ff21b9 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -19,22 +19,14 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 
 /* CPU */
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024) /* 64MB */
-#define CONFIG_SYS_INIT_SP_ADDR		(ATMEL_BASE_SRAM1 + 0x1000 - \
-					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	ATMEL_BASE_SRAM1
 
 /* Mem test settings */
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + (1024 * 1024))
 
 /* NAND Flash */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
@@ -45,15 +37,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
 
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-#define CONFIG_TFTP_PORT
-#define CONFIG_TFTP_TSIZE
-
 /* USB */
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
@@ -64,25 +47,17 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 
 /* GPIOs and IO expander */
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_GPIO_PULLUP		1
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR	0x28
 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x28, 16} }
 
 /* UARTs/Serial console */
-#define CONFIG_ATMEL_USART
 #ifndef CONFIG_DM_SERIAL
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 #endif
 
 /* I2C - Bit-bashed */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED	100000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 #define I2C_INIT do {							\
 		at91_set_gpio_output(AT91_PIN_PA23, 1);			\
@@ -106,16 +81,9 @@
 #define I2C_DELAY	udelay(2)
 
 /* Boot options */
-#define CONFIG_SYS_LOAD_ADDR		0x23000000
-
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /* Environment settings */
-#define CONFIG_ENV_OVERWRITE
 
 /* Console settings */
 
-/* U-Boot memory settings */
-#define CONFIG_SYS_MALLOC_LEN		(1 << 20)
-
 #endif /* __CONFIG_H */