X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsnapper9260.h;h=3674e914bbf7ea5f4fdfe0b13f3ad793128f6538;hb=adad96e60d0eb1bbc4d0b96c89decf385a426e42;hp=218ca546bbc8b436cdd6cf96d780affdd9b2ac09;hpb=a6f0c4faa4c65a7b7048b12c9d180d7e1aad1721;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 218ca54..3674e91 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -5,23 +5,7 @@ * Author: Andre Renaud * Author: Ryan Mallon * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -29,14 +13,13 @@ /* SoC type is defined in boards.cfg */ #include -#include +#include -#define CONFIG_SYS_TEXT_BASE 0x20000000 +#define CONFIG_SYS_TEXT_BASE 0x21f00000 /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000 /* CPU */ #define CONFIG_ARCH_CPU_INIT @@ -45,9 +28,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_FIT /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 @@ -76,11 +57,13 @@ #define CONFIG_RMII #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R +#define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_TFTP_PORT #define CONFIG_TFTP_TSIZE /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT @@ -90,7 +73,6 @@ #define CONFIG_USB_STORAGE /* GPIOs and IO expander */ -#define CONFIG_AT91_LEGACY #define CONFIG_ATMEL_LEGACY #define CONFIG_AT91_GPIO #define CONFIG_AT91_GPIO_PULLUP 1 @@ -100,17 +82,18 @@ /* UARTs/Serial console */ #define CONFIG_ATMEL_USART +#ifndef CONFIG_DM_SERIAL #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS +#endif #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_PROMPT "Snapper> " /* I2C - Bit-bashed */ -#define CONFIG_SOFT_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ +#define CONFIG_SYS_I2C_SOFT_SPEED 100000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F #define CONFIG_SOFT_I2C_READ_REPEATED_START -#define CONFIG_I2C_MULTI_BUS #define I2C_INIT do { \ at91_set_gpio_output(AT91_PIN_PA23, 1); \ at91_set_gpio_output(AT91_PIN_PA24, 1); \ @@ -157,25 +140,15 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* U-Boot memory settings */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Command line configuration */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C -#undef CONFIG_CMD_GPIO #define CONFIG_CMD_USB #define CONFIG_CMD_MII #define CONFIG_CMD_NAND