X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsnapper9260.h;h=1ebee714ba3e5c568c86c99b937b7d5a2c645644;hb=7f14fb20f895016fb38d30ce71aeb4d441b5bcb8;hp=383d1ce01367e0ab6d9b4c34357d12e5707d42ae;hpb=1a4596601fd395f3afb8f82f3f840c5e00bdd57a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 383d1ce..1ebee71 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -13,14 +13,13 @@
 
 /* SoC type is defined in boards.cfg */
 #include <asm/hardware.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 
 #define CONFIG_SYS_TEXT_BASE		0x20000000
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_HZ			1000
 
 /* CPU */
 #define CONFIG_ARCH_CPU_INIT
@@ -60,11 +59,13 @@
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R
+#define CONFIG_AT91_WANTS_COMMON_PHY
 #define CONFIG_TFTP_PORT
 #define CONFIG_TFTP_TSIZE
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -74,7 +75,6 @@
 #define CONFIG_USB_STORAGE
 
 /* GPIOs and IO expander */
-#define CONFIG_AT91_LEGACY
 #define CONFIG_ATMEL_LEGACY
 #define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP		1
@@ -90,11 +90,11 @@
 #define CONFIG_SYS_PROMPT		"Snapper> "
 
 /* I2C - Bit-bashed */
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
 #define I2C_INIT do {							\
 		at91_set_gpio_output(AT91_PIN_PA23, 1);			\
 		at91_set_gpio_output(AT91_PIN_PA24, 1);			\