X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmdkc100.h;h=080fc3a84599e30cbee4a292d0e7487921c4f15c;hb=9597494ebfb60418e8a0e7565cca2b7d25512bf5;hp=595d17400134174ca24fc372678eef482908c54b;hpb=a78ded13111dde555ed5de99cff10f41ae674cb1;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 595d174..080fc3a 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -6,23 +6,7 @@
  *
  * Configuation settings for the SAMSUNG SMDKC100 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -32,7 +16,6 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
 #define CONFIG_S5P		1	/* which is in a S5P Family */
 #define CONFIG_S5PC100		1	/* which is in a S5PC100 */
@@ -45,14 +28,15 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
 /* input clock of PLL: SMDKC100 has 12MHz input clock */
 #define CONFIG_SYS_CLK_FREQ		12000000
 
 /* DRAM Base */
 #define CONFIG_SYS_SDRAM_BASE		0x30000000
 
+/* Text Base */
+#define CONFIG_SYS_TEXT_BASE		0x34800000
+
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
@@ -63,13 +47,14 @@
  * 1MB = 0x100000, 0x100000 = 1024 * 1024
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes for */
-						/* initial data */
+
 /*
  * select serial console configuration
  */
 #define CONFIG_SERIAL0			1	/* use SERIAL 0 on SMDKC100 */
-#define CONFIG_SERIAL_MULTI		1
+
+/* PWM */
+#define CONFIG_PWM			1
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -171,7 +156,6 @@
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		"SMDKC100 # "
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
@@ -183,18 +167,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5e00000)
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
 
-#define CONFIG_SYS_HZ			1000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(256 << 10)	/* 256 KiB */
-
 /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* SDRAM Bank #1 */
@@ -210,7 +182,7 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 KiB */
 #define CONFIG_IDENT_STRING		" for SMDKC100"
 
-#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
 #define CONFIG_ENABLE_MMU
 #endif
 
@@ -234,15 +206,20 @@
 
 #define CONFIG_DOS_PARTITION		1
 
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
 /*
  * Ethernet Contoller driver
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X         1       /* we have a SMC9115 on-board   */
 #define CONFIG_SMC911X_16_BIT  1       /* SMC911X_16_BIT Mode          */
 #define CONFIG_SMC911X_BASE    0x98800300      /* SMC911X Drive Base   */
 #define CONFIG_ENV_SROM_BANK   3       /* Select SROM Bank-3 for Ethernet*/
 #endif /* CONFIG_CMD_NET */
 
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_SYS_GENERIC_BOARD
+
 #endif	/* __CONFIG_H */