X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmdk2410.h;h=f9d1e55186fc783c3280de7eceb26a43a8c84c94;hb=bb3bcfa2426cc6a0aecec7270e3ee67ca843a125;hp=fb437069daaa9b51a3f07889535cc90511d89963;hpb=dfc91c33957c95da34e3888dc87912d5c15a7603;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index fb43706..f9d1e55 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <gj@denx.de>
+ * Gary Jennejohn <garyj@denx.de>
  * David Mueller <d.mueller@elsoft.ch>
  *
  * Configuation settings for the SAMSUNG SMDK2410 board.
@@ -33,9 +33,10 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-#define	CONFIG_S3C2410		1	/* in a SAMSUNG S3C2410 SoC     */
-#define CONFIG_SMDK2410		1	/* on a SAMSUNG SMDK2410 Board  */
+#define CONFIG_ARM920T	1	/* This is an ARM920T Core	*/
+#define CONFIG_S3C24X0	1	/* in a SAMSUNG S3C24x0-type SoC	*/
+#define CONFIG_S3C2410	1	/* specifically a SAMSUNG S3C2410 SoC	*/
+#define CONFIG_SMDK2410	1	/* on a SAMSUNG SMDK2410 Board  */
 
 /* input clock of PLL */
 #define CONFIG_SYS_CLK_FREQ	12000000/* the SMDK2410 has 12MHz input clock */
@@ -53,9 +54,10 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
-#define CS8900_BASE		0x19000300
-#define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
+#define CONFIG_NET_MULTI
+#define CONFIG_CS8900		/* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE	0x19000300
+#define CONFIG_CS8900_BUS16	/* the Linux driver does accesses as shorts */
 
 /*
  * select serial console configuration
@@ -123,9 +125,7 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x33000000	/* default load address	*/
 
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define	CONFIG_SYS_HZ			1562500
+#define	CONFIG_SYS_HZ			1000
 
 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }