X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmdk2400.h;h=22e69725b37145adfc6730d2821d333ec7bf671f;hb=7be044e4ea644b0ef1c486dadc1a4c2665b4374d;hp=543dfb071972c0eadfd7c880a26dba078973e07e;hpb=699b13a6064e642280caffaa83c10b359a6c1114;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index 543dfb0..22e6972 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2002-2005
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Marius Groeger <mgroeger@sysgo.de>
@@ -29,12 +31,6 @@
 #define __CONFIG_H
 
 /*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_INIT_CRITICAL		/* undef for developing */
-
-/*
  * High Level Configuration Options
  * (easy to change)
  */
@@ -43,7 +39,7 @@
 #define CONFIG_SMDK2400		1	/* on an SAMSUNG SMDK2400 Board */
 
 /* input clock of PLL */
-#define CONFIG_PLL_INPUT_FREQ	12000000 /* SMDK2400 has 12 MHz input clock */
+#define CONFIG_SYS_CLK_FREQ	12000000 /* SMDK2400 has 12 MHz input clock */
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
 #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
@@ -55,6 +51,7 @@
  * Size of malloc() pool
  */
 #define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -86,20 +83,26 @@
 
 #define	CONFIG_TIMESTAMP	1	/* Print timestamp info for images */
 
-#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS_tmp	(CONFIG_CMD_DFL & ~CFG_CMD_CACHE)
-#else
-#define CONFIG_COMMANDS_tmp	(CONFIG_CMD_DFL)
+/* Use s3c2400's RTC */
+#define CONFIG_RTC_S3C24X0	1
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_HWFLOW)
+    #define CONFIG_CONFIG_HWFLOW
 #endif
 
-#ifdef CONFIG_HWFLOW
-#define CONFIG_COMMANDS		(CONFIG_COMMANDS_tmp | CFG_CMD_HWFLOW)
-#else
-#define CONFIG_COMMANDS		CONFIG_COMMANDS_tmp
+#if !defined(USE_920T_MMU)
+    #undef CONFIG_CMD_CACHE
 #endif
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY	3
 #if 0
@@ -114,7 +117,7 @@
 #define CONFIG_BOOTCOMMAND	"tftp; bootm"
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
@@ -162,10 +165,7 @@
 #define PHYS_SDRAM_1		0x0c000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
 
-#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE		0x00800000 /* 8 MB */
-
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CFG_FLASH_BASE		0x00000000 /* Flash Bank #1 */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -180,7 +180,7 @@
 #define	CFG_ENV_IS_IN_FLASH	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x40000)
 #define CFG_ENV_SIZE		0x40000
 
 /* Address and size of Redundant Environment Sector	*/