X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmdk2400.h;h=064749e2d6d67b057a1df42cc723db1654ae7341;hb=22a9ea974bdf18e6adad5c4f80b1c60ef384690c;hp=d0ad65ef2c95c6203fea01f3059d05d160f7e451;hpb=6069ff265362ef6239749b5f598b137f407b821e;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index d0ad65e..064749e 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -1,8 +1,10 @@ /* + * (C) Copyright 2002-2005 + * Wolfgang Denk, DENX Software Engineering, * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH * Marius Groeger - * Gary Jennejohn + * Gary Jennejohn * * Configuation settings for the SAMSUNG board. * @@ -29,18 +31,13 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ - -/* * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T core */ -#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */ -#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */ +#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000 /* SMDK2400 has 12 MHz input clock */ @@ -54,18 +51,20 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* * Hardware drivers */ -#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ -#define CS8900_BASE 0x07000300 /* agrees with WIN CE PA */ -#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ +#define CONFIG_NET_MULTI +#define CONFIG_CS8900 /* we have a CS8900 on-board */ +#define CONFIG_CS8900_BASE 0x07000300 /* agrees with WIN CE PA */ +#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */ /* * select serial console configuration */ +#define CONFIG_S3C24X0_SERIAL #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SAMSUNG */ #undef CONFIG_HWFLOW /* include RTS/CTS flow control support */ @@ -86,35 +85,42 @@ #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ -#ifndef USE_920T_MMU -#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL & ~CFG_CMD_CACHE) -#else -#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL) +/* Use s3c2400's RTC */ +#define CONFIG_RTC_S3C24X0 1 + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_HWFLOW) + #define CONFIG_CONFIG_HWFLOW #endif -#ifdef CONFIG_HWFLOW -#define CONFIG_COMMANDS (CONFIG_COMMANDS_tmp | CFG_CMD_HWFLOW) -#else -#define CONFIG_COMMANDS CONFIG_COMMANDS_tmp +#if !defined(USE_920T_MMU) + #undef CONFIG_CMD_CACHE #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include #define CONFIG_BOOTDELAY 3 -#if 0 -#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#endif #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 134.98.93.36 #define CONFIG_SERVERIP 134.98.93.22 -#if 0 -#define CONFIG_BOOTFILE "elinos-lart" -#define CONFIG_BOOTCOMMAND "tftp; bootm" -#endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ @@ -123,26 +129,22 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "SMDK2400 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x0c000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0e000000 /* 32 MB in DRAM */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "SMDK2400 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_MEMTEST_START 0x0c000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0e000000 /* 32 MB in DRAM */ -#define CFG_LOAD_ADDR 0x0cf00000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x0cf00000 /* default load address */ -/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -/* it to wrap 100 times (total 1562500) to get 1 sec. */ -#define CFG_HZ 1562500 +#define CONFIG_SYS_HZ 1000 /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*----------------------------------------------------------------------- * Stack sizes @@ -162,26 +164,26 @@ #define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define CFG_FLASH_BASE 0x00000000 /* Flash Bank #1 */ +#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */ /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT (64) /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ -#define CFG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH 1 /* Address and size of Primary Environment Sector */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x40000) -#define CFG_ENV_SIZE 0x40000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) +#define CONFIG_ENV_SIZE 0x40000 /* Address and size of Redundant Environment Sector */ -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #endif /* __CONFIG_H */