X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmartweb.h;h=c1a43a5e550aff1309c6d65d1ec524001d1d669e;hb=e4b91f085d4259f187052ff724c80af38fc11b18;hp=49c838bf72a811db9a74e44019fc947c76f2a8ee;hpb=43ede0bca7fc1590b623832b743213b818257a27;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 49c838b..c1a43a5 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
@@ -16,8 +17,6 @@
  * DENX Software Engineering GmbH
  *
  * Configuation settings for the smartweb.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -35,7 +34,6 @@
  * program. Since the linker has to swallow that define, we must use a pure
  * hex number here!
  */
-#define CONFIG_SYS_TEXT_BASE		0x23000000
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
@@ -52,9 +50,7 @@
 
 /* setting board specific options */
 #define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_AUTOLOAD "yes"
 #define CONFIG_RESET_TO_RETRY
 
@@ -66,7 +62,6 @@
  * SDRAM: 1 bank, 64 MB, base address 0x20000000
  * Already initialized before u-boot gets started.
  */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE		(64 * SZ_1M)
 
@@ -82,7 +77,6 @@
 	ROUND(3 * CONFIG_ENV_SIZE + (4 * SZ_1M), 0x1000)
 
 /* NAND flash settings */
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -91,8 +85,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
 
-#define CONFIG_MTD_DEVICE
-
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO		/* enable the GPIO features */
@@ -114,22 +106,12 @@
 
 /* BOOTP and DHCP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_NFSBOOTCOMMAND						\
 	"setenv autoload yes; setenv autoboot yes; "			\
 	"setenv bootargs ${basicargs} ${mtdparts} "			\
 	"root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; "	\
 	"dhcp"
 
-/* Enable the watchdog */
-#define CONFIG_AT91SAM9_WATCHDOG
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_HW_WATCHDOG
-#endif
-#define CONFIG_AT91_HW_WDT_TIMEOUT	15
-
 #if !defined(CONFIG_SPL_BUILD)
 /* USB configuration */
 #define CONFIG_USB_ATMEL
@@ -141,8 +123,6 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 
 /* USB DFU support */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 
 #define CONFIG_USB_GADGET_AT91
 
@@ -154,8 +134,6 @@
 /* General Boot Parameter */
 #define CONFIG_BOOTCOMMAND		"run flashboot"
 #define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
 
 /*
  * RAM Memory address where to put the
@@ -166,10 +144,8 @@
 /*
  * The NAND Flash partitions:
  */
-#define CONFIG_ENV_OFFSET		(0x100000)
 #define CONFIG_ENV_OFFSET_REDUND	(0x180000)
 #define CONFIG_ENV_RANGE		(SZ_512K)
-#define CONFIG_ENV_SIZE			(SZ_128K)
 
 /*
  * Predefined environment variables.
@@ -196,8 +172,6 @@
 #endif
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x0
 #define CONFIG_SPL_MAX_SIZE		(SZ_4K)
 
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SYS_SDRAM_BASE
@@ -240,8 +214,7 @@
 #define CONFIG_SYS_MCKR_CSS		(0x02 | CONFIG_SYS_MCKR)
 #define CONFIG_SYS_AT91_PLLB		0x10483f0e
 
-#if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-#endif
+#define CONFIG_SPL_PAD_TO		CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN		CONFIG_SPL_PAD_TO
+
 #endif /* __CONFIG_H */