X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmartweb.h;h=aacdd1263e7b545ebf7b9206e0b2417c3a07f3ee;hb=702de89cc6a34c1c23dd3d987b0472b2cecdb63c;hp=bf01cf791d5dd8f7c0d85f87799391f1a4fd82b1;hpb=432e39806805c46d583e75e8dd2f7b71cc6089c1;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index bf01cf7..aacdd12 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
@@ -16,8 +17,6 @@
  * DENX Software Engineering GmbH
  *
  * Configuation settings for the smartweb.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -35,7 +34,6 @@
  * program. Since the linker has to swallow that define, we must use a pure
  * hex number here!
  */
-#define CONFIG_SYS_TEXT_BASE		0x23000000
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
@@ -52,9 +50,7 @@
 
 /* setting board specific options */
 #define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_AUTOLOAD "yes"
 #define CONFIG_RESET_TO_RETRY
 
@@ -66,7 +62,6 @@
  * SDRAM: 1 bank, 64 MB, base address 0x20000000
  * Already initialized before u-boot gets started.
  */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE		(64 * SZ_1M)
 
@@ -74,15 +69,12 @@
  * Perform a SDRAM Memtest from the start of SDRAM
  * till the beginning of the U-Boot position in RAM.
  */
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - 0x100000)
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN \
 	ROUND(3 * CONFIG_ENV_SIZE + (4 * SZ_1M), 0x1000)
 
 /* NAND flash settings */
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -91,17 +83,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
 
-#define CONFIG_MTD_DEVICE
-#define MTDIDS_NAME_STR		"atmel_nand"
-#define MTDIDS_DEFAULT		"nand0=" MTDIDS_NAME_STR
-#define MTDPARTS_DEFAULT	"mtdparts=" MTDIDS_NAME_STR ":" \
-					"128k(Bootstrap),"		\
-					"896k(U-Boot),"	\
-					"512k(ENV0),"	\
-					"512k(ENV1),"	\
-					"4M(Linux),"	\
-					"-(Root-FS)"
-
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO		/* enable the GPIO features */
@@ -117,31 +98,18 @@
  *
  */
 #define CONFIG_MACB
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
 #define CONFIG_RMII			/* use reduced MII inteface */
 #define CONFIG_NET_RETRY_COUNT	20      /* # of DHCP/BOOTP retries */
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* BOOTP and DHCP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_NFSBOOTCOMMAND						\
 	"setenv autoload yes; setenv autoboot yes; "			\
 	"setenv bootargs ${basicargs} ${mtdparts} "			\
 	"root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; "	\
 	"dhcp"
 
-/* Enable the watchdog */
-#define CONFIG_AT91SAM9_WATCHDOG
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_HW_WATCHDOG
-#endif
-#define CONFIG_AT91_HW_WDT_TIMEOUT	15
-
 #if !defined(CONFIG_SPL_BUILD)
 /* USB configuration */
 #define CONFIG_USB_ATMEL
@@ -153,8 +121,6 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 
 /* USB DFU support */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 
 #define CONFIG_USB_GADGET_AT91
 
@@ -166,8 +132,6 @@
 /* General Boot Parameter */
 #define CONFIG_BOOTCOMMAND		"run flashboot"
 #define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
 
 /*
  * RAM Memory address where to put the
@@ -178,10 +142,7 @@
 /*
  * The NAND Flash partitions:
  */
-#define CONFIG_ENV_OFFSET		(0x100000)
-#define CONFIG_ENV_OFFSET_REDUND	(0x180000)
 #define CONFIG_ENV_RANGE		(SZ_512K)
-#define CONFIG_ENV_SIZE			(SZ_128K)
 
 /*
  * Predefined environment variables.
@@ -191,7 +152,7 @@
 									\
 	"basicargs=console=ttyS0,115200\0"				\
 									\
-	"mtdparts="MTDPARTS_DEFAULT"\0"
+	"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"
 
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR		0x301000
@@ -208,8 +169,6 @@
 #endif
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x0
 #define CONFIG_SPL_MAX_SIZE		(SZ_4K)
 
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SYS_SDRAM_BASE
@@ -252,8 +211,7 @@
 #define CONFIG_SYS_MCKR_CSS		(0x02 | CONFIG_SYS_MCKR)
 #define CONFIG_SYS_AT91_PLLB		0x10483f0e
 
-#if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-#endif
+#define CONFIG_SPL_PAD_TO		CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN		CONFIG_SPL_PAD_TO
+
 #endif /* __CONFIG_H */