X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmartweb.h;h=8667052d357715e2ad4c2e81a68f5291b44e44b8;hb=10f6e4dc3a16c21f235416f975ecf2070ceb351f;hp=2a00bfa0d427da6d2e52abd2d7439d5eb0978f51;hpb=a542e4307db9dcdfdc0c1cd961b896c261c7f3da;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 2a00bfa..8667052 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -41,16 +41,8 @@
 
 /* misc settings */
 
-/* We set the max number of command args high to avoid HUSH bugs. */
-#define CONFIG_SYS_MAXARGS    32
-
 /* setting board specific options */
 #define CONFIG_SYS_AUTOLOAD "yes"
-#define CONFIG_RESET_TO_RETRY
-
-/* The LED PINs */
-#define CONFIG_RED_LED			AT91_PIN_PA9
-#define CONFIG_GREEN_LED		AT91_PIN_PA6
 
 /*
  * SDRAM: 1 bank, 64 MB, base address 0x20000000
@@ -73,24 +65,10 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
 
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
-
 /* serial console */
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 
-/*
- * Ethernet configuration
- *
- */
-#define CONFIG_RMII			/* use reduced MII inteface */
-#define CONFIG_NET_RETRY_COUNT	20      /* # of DHCP/BOOTP retries */
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-/* BOOTP and DHCP options */
-
 #if !defined(CONFIG_SPL_BUILD)
 /* USB configuration */
 #define CONFIG_USB_ATMEL
@@ -110,7 +88,6 @@
 #endif
 
 /* General Boot Parameter */
-#define CONFIG_SYS_CBSIZE		512
 
 /*
  * The NAND Flash partitions:
@@ -127,31 +104,17 @@
 									\
 	"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x301000
-#else
 /*
  * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
  * leaving the correct space for initial global data structure above that
  * address while providing maximum stack area below.
  */
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
-#endif
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	ATMEL_BASE_SRAM1
 
 /* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE		(SZ_4K)
-
-#define CONFIG_SPL_BSS_START_ADDR	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SPL_BSS_MAX_SIZE		(SZ_16K)
-#define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
-					CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
-#define CONFIG_SYS_USE_NANDFLASH	1
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
@@ -163,7 +126,6 @@
 					  48, 49, 50, 51, 52, 53, 54, 55, \
 					  56, 57, 58, 59, 60, 61, 62, 63, }
 
-#define CONFIG_SPL_ATMEL_SIZE
 #define CONFIG_SYS_MASTER_CLOCK		(198656000/2)
 #define AT91_PLL_LOCK_TIMEOUT		1000000
 #define CONFIG_SYS_AT91_PLLA		0x2060bf09
@@ -171,7 +133,6 @@
 #define CONFIG_SYS_MCKR_CSS		(0x02 | CONFIG_SYS_MCKR)
 #define CONFIG_SYS_AT91_PLLB		0x10483f0e
 
-#define CONFIG_SPL_PAD_TO		CONFIG_SYS_NAND_U_BOOT_OFFS
 #define CONFIG_SYS_SPL_LEN		CONFIG_SPL_PAD_TO
 
 #endif /* __CONFIG_H */