X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmartweb.h;h=840027820947a7cf7b46104cfae3360780e1e915;hb=8d3a25685e4aac7070365a2b3c53c2c81b27930f;hp=fb1a51e543963d490a816ecd95d2a6a8e78e3327;hpb=53b5bf3c1d24c3a0d92c7cf0824a51bde41ee321;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index fb1a51e..8400278 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -46,8 +46,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS	/* pass memory defs to kernel */
 #define CONFIG_INITRD_TAG		/* pass initrd param to kernel */
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY	/* U-Boot is loaded by a bootloader */
-#define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f() */
-#define CONFIG_DISPLAY_CPUINFO		/* display CPU Info at startup */
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS    32
@@ -85,7 +83,6 @@
 
 /* NAND flash settings */
 #define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -115,7 +112,6 @@
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
 
 /*
  * Ethernet configuration
@@ -166,8 +162,6 @@
 #define CONFIG_USB_GADGET_AT91
 
 /* DFU class support */
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_NAND
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_1M
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
 #endif
@@ -217,6 +211,9 @@
 #define CONFIG_SYS_INIT_SP_ADDR		0x301000
 #define CONFIG_SPL_STACK_R
 #define CONFIG_SPL_STACK_R_ADDR		CONFIG_SYS_TEXT_BASE
+/* we have only 4k sram in SPL, so cut SYS_MALLOC_F_LEN */
+#undef CONFIG_SYS_MALLOC_F_LEN
+#define CONFIG_SYS_MALLOC_F_LEN 0x400
 #else
 /*
  * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
@@ -239,12 +236,7 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SPL_LDSCRIPT	arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_USE_NANDFLASH	1
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
@@ -279,9 +271,7 @@
 #define CONFIG_SYS_AT91_PLLB		0x10483f0e
 
 #if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
-#undef CONFIG_SPL_OS_BOOT		/* Not supported by existing map */
 #endif
 #endif /* __CONFIG_H */