X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmartweb.h;h=75a1670e3317571de951f155bdec968114a64916;hb=78f67f11a9920ef988cbff5341616695c3e87ebd;hp=a0b353902e765d1c06b617c2ae21ea061ebe59fc;hpb=3b2d19c838a48350e06d4c12e4d749eec0217f2c;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index a0b3539..75a1670 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -30,33 +30,23 @@ #include /* - * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot + * Warning: changing CONFIG_TEXT_BASE requires adapting the initial boot * program. Since the linker has to swallow that define, we must use a pure * hex number here! */ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ /* misc settings */ -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 32 - -/* setting board specific options */ -#define CONFIG_SYS_AUTOLOAD "yes" - -/* The LED PINs */ -#define CONFIG_RED_LED AT91_PIN_PA9 -#define CONFIG_GREEN_LED AT91_PIN_PA6 - /* * SDRAM: 1 bank, 64 MB, base address 0x20000000 * Already initialized before u-boot gets started. */ -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE (64 * SZ_1M) +#define CFG_SYS_SDRAM_BASE ATMEL_BASE_CS1 +#define CFG_SYS_SDRAM_SIZE (64 * SZ_1M) /* * Perform a SDRAM Memtest from the start of SDRAM @@ -64,99 +54,55 @@ */ /* NAND flash settings */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 +#define CFG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CFG_SYS_NAND_MASK_ALE (1 << 21) +#define CFG_SYS_NAND_MASK_CLE (1 << 22) +#define CFG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CFG_SYS_NAND_READY_PIN AT91_PIN_PC13 /* serial console */ -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -#if !defined(CONFIG_SPL_BUILD) -/* USB configuration */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -/* USB DFU support */ - -#define CONFIG_USB_GADGET_AT91 +#define CFG_USART_BASE ATMEL_BASE_DBGU +#define CFG_USART_ID ATMEL_ID_SYS /* DFU class support */ #define DFU_MANIFEST_POLL_TIMEOUT 25000 -#endif /* General Boot Parameter */ -#define CONFIG_SYS_CBSIZE 512 - -/* - * The NAND Flash partitions: - */ -#define CONFIG_ENV_RANGE (SZ_512K) /* * Predefined environment variables. * Usefull to define some easy to use boot commands. */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ \ "basicargs=console=ttyS0,115200\0" \ \ - "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x301000 -#else /* * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, * leaving the correct space for initial global data structure above that * address while providing maximum stack area below. */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) -#endif +#define CFG_SYS_INIT_RAM_SIZE 0x1000 +#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE (SZ_4K) - -#define CONFIG_SPL_BSS_START_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_SPL_BSS_MAX_SIZE (SZ_16K) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN - -#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SYS_USE_NANDFLASH 1 -#define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_SOFTECC -#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_NAND_SIZE (SZ_256M) -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ + +#define CFG_SYS_NAND_U_BOOT_SIZE SZ_512K +#define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE + +#define CFG_SYS_NAND_ECCSIZE 256 +#define CFG_SYS_NAND_ECCBYTES 3 +#define CFG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } -#define CONFIG_SPL_ATMEL_SIZE -#define CONFIG_SYS_MASTER_CLOCK (198656000/2) +#define CFG_SYS_MASTER_CLOCK (198656000/2) #define AT91_PLL_LOCK_TIMEOUT 1000000 -#define CONFIG_SYS_AT91_PLLA 0x2060bf09 -#define CONFIG_SYS_MCKR 0x100 -#define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) -#define CONFIG_SYS_AT91_PLLB 0x10483f0e - -#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS -#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO +#define CFG_SYS_AT91_PLLA 0x2060bf09 +#define CFG_SYS_MCKR 0x100 +#define CFG_SYS_MCKR_CSS (0x02 | CFG_SYS_MCKR) +#define CFG_SYS_AT91_PLLB 0x10483f0e #endif /* __CONFIG_H */