X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsmartweb.h;h=4cbc903098232697e3d2daa22268b9bdfa4f81b9;hb=268d05f552e5408c16dab5a963d85e2fb4f883aa;hp=fd35f71f913c9201c1abbaed51b0ee62ae7ad914;hpb=2c45f8040ea1152d2ff0960f96905ca42ac089cd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index fd35f71..4cbc903 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -46,12 +46,12 @@
 #define CONFIG_SETUP_MEMORY_TAGS	/* pass memory defs to kernel */
 #define CONFIG_INITRD_TAG		/* pass initrd param to kernel */
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY	/* U-Boot is loaded by a bootloader */
-#define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f() */
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS    32
 
 /* setting board specific options */
+#define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
 #define CONFIG_AUTO_COMPLETE
@@ -83,7 +83,6 @@
 
 /* NAND flash settings */
 #define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -92,7 +91,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
 
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define MTDIDS_NAME_STR		"atmel_nand"
 #define MTDIDS_DEFAULT		"nand0=" MTDIDS_NAME_STR
@@ -113,17 +111,12 @@
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
 
 /*
  * Ethernet configuration
  *
  */
 #define CONFIG_MACB
-#define CONFIG_PHYLIB
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
 #define CONFIG_RMII			/* use reduced MII inteface */
 #define CONFIG_NET_RETRY_COUNT	20      /* # of DHCP/BOOTP retries */
 #define CONFIG_AT91_WANTS_COMMON_PHY
@@ -157,7 +150,6 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 
 /* USB DFU support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
@@ -171,8 +163,6 @@
 /* General Boot Parameter */
 #define CONFIG_BOOTCOMMAND		"run flashboot"
 #define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_PBSIZE \
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 
@@ -185,7 +175,6 @@
 /*
  * The NAND Flash partitions:
  */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		(0x100000)
 #define CONFIG_ENV_OFFSET_REDUND	(0x180000)
 #define CONFIG_ENV_RANGE		(SZ_512K)
@@ -201,14 +190,6 @@
 									\
 	"mtdparts="MTDPARTS_DEFAULT"\0"
 
-/* Command line & features configuration */
-
-#define CONFIG_CMD_NAND
-
-#ifdef CONFIG_MACB
-#else
-#endif /* CONFIG_MACB */
-
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR		0x301000
 #define CONFIG_SPL_STACK_R
@@ -233,9 +214,7 @@
 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_LDSCRIPT	arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
 #define CONFIG_SYS_USE_NANDFLASH	1
 #define CONFIG_SPL_NAND_DRIVERS
@@ -271,7 +250,6 @@
 #define CONFIG_SYS_AT91_PLLB		0x10483f0e
 
 #if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
 #endif