X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsiemens-am33x-common.h;h=9cf3c6753698ef9c68578356704ea6758a017b66;hb=55dabcc8f24598e2777f663de09ab55fbe1269da;hp=97903a08e11bae14598318fcd10b1f1bfbb5c3f5;hpb=f0306a145b3234ae4bd3b46f2567b6f1ad7b8f4f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 97903a0..9cf3c67 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -18,7 +18,6 @@
 #define CONFIG_DMA_COHERENT
 #define CONFIG_DMA_COHERENT_SIZE	(1 << 20)
 
-#define CONFIG_ENV_SIZE			(0x2000)
 #define CONFIG_SYS_MALLOC_LEN		(16 * 1024 * 1024)
 #ifdef CONFIG_SIEMENS_MACH_TYPE
 #define CONFIG_MACH_TYPE		CONFIG_SIEMENS_MACH_TYPE
@@ -34,8 +33,6 @@
 #define CONFIG_ROOTPATH		"/opt/eldk"
 #endif
 
-#define CONFIG_ENV_OVERWRITE		1
-
 #define CONFIG_SYS_AUTOLOAD	"yes"
 
 /* Clock Defines */
@@ -55,16 +52,10 @@
  * memtest works on 8 MB in DRAM after skipping 32MB from
  * start addr of ram disk
  */
-#define CONFIG_SYS_MEMTEST_START	(PHYS_DRAM_1 + (64 * 1024 * 1024))
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START \
-					+ (8 * 1024 * 1024))
 
 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
 
-#define CONFIG_SF_DEFAULT_SPEED		(75000000)
-
  /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1		/*  1 bank of DRAM */
 #define PHYS_DRAM_1			0x80000000	/* DRAM Bank #1 */
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
@@ -75,36 +66,23 @@
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 
 /* NS16550 Configuration */
-#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#endif
 #define CONFIG_SYS_NS16550_CLK		(48000000)
 #define CONFIG_SYS_NS16550_COM1		0x44e09000
 #define CONFIG_SYS_NS16550_COM4		0x481a6000
 
-#define CONFIG_SERIAL1                  1
 
 /* I2C Configuration */
-#define CONFIG_I2C
-#define CONFIG_SYS_I2C
 
 /* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE		0x402F0400
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
-
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
@@ -154,8 +132,6 @@
 /*
  * USB configuration
  */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
 #define CONFIG_AM335X_USB1
@@ -165,7 +141,6 @@
 #define CONFIG_USBD_HS
 
 /* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 << 20)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
 
 #endif /* CONFIG_SPL_BUILD */
@@ -182,24 +157,14 @@
  * 0xE0000 - 0x442000 : Linux Kernel
  * 0x442000 - 0x800000 : Userland
  */
-#if defined(CONFIG_SPI_BOOT)
-# define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
-# define CONFIG_ENV_OFFSET		(892 << 10) /* 892 KiB in */
-# define CONFIG_ENV_SECT_SIZE		(4 << 10) /* 4 KB sectors */
-#endif /* SPI support */
-
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
+
 #define CONFIG_NET_RETRY_COUNT         10
 
 /* NAND support */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 /* UBI Support */
 
 /* Commen environment */
-#define CONFIG_PREBOOT
 #define COMMON_ENV_DFU_ARGS	"dfu_args=run bootargs_defaults;" \
 				"setenv bootargs ${bootargs};" \
 				"mtdparts default;" \
@@ -239,7 +204,6 @@
 	"project_dir=targetdir\0" \
 	"upgrade_available=0\0" \
 	"altbootcmd=run bootcmd\0" \
-	"bootlimit=3\0" \
 	"partitionset_active=A\0" \
 	"loadaddr=0x82000000\0" \
 	"kloadaddr=0x81000000\0" \
@@ -471,7 +435,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND
 							   devices */
 #if !defined(CONFIG_SPI_BOOT)
-#define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
 #endif
 #endif