X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fshannon.h;h=edc9a2ef126f3d754574e7cc84166edf9699506d;hb=0e8d158664a913392cb01fb11a948d83f72e105e;hp=53cc8cf9be0282d73bccb79132c3750df17ba3ca;hpb=699b13a6064e642280caffaa83c10b359a6c1114;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index 53cc8cf..edc9a2e 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -28,16 +28,13 @@
 #define __CONFIG_H
 
 /*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-
-/*
- * we just run in non-critical mode now, because we use the Inferno-Loader to
- * bring us to live
+ * Since we use the Inferno-Loader to bring us to live,
+ * we skip the lowlevel init stuff.
+ * But U-Boot still relocates itself into RAM
  */
 #define CONFIG_INFERNO			/* we are using the inferno bootldr */
-#undef CONFIG_INIT_CRITICAL		/* undef for developing */
+#define CONFIG_SKIP_LOWLEVEL_INIT	1
+#undef  CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * High Level Configuration Options
@@ -51,7 +48,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CFG_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -68,21 +66,28 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				 CFG_CMD_PCMCIA	| \
-				 CFG_CMD_IDE)
-#endif /* 0 */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 #define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS    	"root=ramfs devfs=mount console=ttySA0,115200"
+#define CONFIG_BOOTARGS		"root=ramfs devfs=mount console=ttySA0,115200"
 #define CONFIG_NETMASK          255.255.0.0
 #define CONFIG_BOOTCOMMAND	"help"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
@@ -153,14 +158,14 @@
 #define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 #ifdef CONFIG_INFERNO
 /* we take the last sector, 128 KB in size, but we only use 4 KB of it for stack reasons */
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x003E0000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x003E0000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 #else
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -204,13 +209,13 @@
 #define CFG_ATA_BASE_ADDR	CFG_PCMCIA_ATTRB_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_ATA_BASE_ADDR)
+#define CFG_ATA_DATA_OFFSET	0
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_BASE_ADDR)
+#define CFG_ATA_REG_OFFSET	0
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(CFG_ATA_BASE_ADDR)
+#define CFG_ATA_ALT_OFFSET	0
 
 /*-----------------------------------------------------------------------
  */