X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fseaboard.h;h=f66173e0f23bffac173e45e5dec7a53a8cdc55a7;hb=11d9c0303949c2e9c2a176f81c0d7355c76bb546;hp=261f9521add4d8e3153106c19d5fe240f09fda8d;hpb=afd855d534de22aa625cb12aa9aa45e459f7de99;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 261f952..f66173e 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -25,51 +25,94 @@
 #define __CONFIG_H
 
 #include <asm/sizes.h>
-#include "tegra2-common.h"
+
+/* LP0 suspend / resume */
+#define CONFIG_TEGRA_LP0
+#define CONFIG_AES
+#define CONFIG_TEGRA_PMU
+#define CONFIG_TPS6586X_POWER
+#define CONFIG_TEGRA_CLOCK_SCALING
+
+#include "tegra20-common.h"
+
+/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra20-seaboard
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
 
 /* High-level configuration options */
-#define TEGRA2_SYSMEM		"mem=384M@0M nvmem=128M@384M mem=512M@512M"
-#define V_PROMPT		"Tegra2 (SeaBoard) # "
-#define CONFIG_TEGRA2_BOARD_STRING	"NVIDIA Seaboard"
+#define V_PROMPT		"Tegra20 (SeaBoard) # "
+#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Seaboard"
 
 /* Board-specific serial config */
-#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTD
+#define CONFIG_TEGRA_ENABLE_UARTD
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
 
 /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
 #define CONFIG_UART_DISABLE_GPIO	GPIO_PI3
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_SEABOARD
-#define CONFIG_SYS_BOARD_ODMDATA	0x300d8011 /* lp1, 1GB */
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT		/* Make sure LCD init is complete */
 
-/* SPI */
-#define CONFIG_TEGRA2_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_SIZE		(4 << 20)
+/* I2C */
+#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS		4
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_CMD_I2C
 
 /* SD/MMC */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA2_MMC
+#define CONFIG_TEGRA_MMC
 #define CONFIG_CMD_MMC
 
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+
+/* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+/* Enable keyboard */
+#define CONFIG_TEGRA_KEYBOARD
+#define CONFIG_KEYBOARD
+
+/* USB keyboard */
+#define CONFIG_USB_KEYBOARD
+
+/* LCD support */
+#define CONFIG_LCD
+#define CONFIG_PWM_TEGRA
+#define CONFIG_VIDEO_TEGRA
+#define LCD_BPP				LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES	10
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_TEGRA_NAND
+
+/* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-/* Environment in SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MAX_HZ		48000000
-#define CONFIG_ENV_SPI_MODE		SPI_MODE_0
+#include "tegra-common-post.h"
 
-#define CONFIG_ENV_SECT_SIZE    CONFIG_ENV_SIZE
-#define CONFIG_ENV_OFFSET       (CONFIG_SPI_FLASH_SIZE - CONFIG_ENV_SECT_SIZE)
 #endif /* __CONFIG_H */