X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fscb9328.h;h=2336a8d4ec477d9a7fd13cd8ba8b3adc8192e4ea;hb=4c25761337570e63e9e2631a81de221e692251e3;hp=5971df72fcbdb1ddd8a58ae5c1359f7e58441e04;hpb=f82642e33899766892499b163e60560fbbf87773;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 5971df7..2336a8d 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -27,14 +27,13 @@
 #define CONFIG_ARM920T		1     /* this is an ARM920T CPU	    */
 #define CONFIG_IMX		1     /* in a Motorola MC9328MXL Chip */
 #define CONFIG_SCB9328		1     /* on a scb9328tronix board */
-#undef	CONFIG_USE_IRQ		      /* don't need use IRQ/FIQ	   */
 
+#define CONFIG_IMX_SERIAL
 #define CONFIG_IMX_SERIAL1
 /*
  * Select serial console configuration
  */
 
-
 /*
  * BOOTP options
  */
@@ -43,7 +42,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -53,10 +51,9 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
-
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 /*
  * Boot options. Setting delay to -1 stops autostart count down.
@@ -86,12 +83,9 @@
 #define CONFIG_SYS_MEMTEST_START	0x08100000	      /* memtest test area   */
 #define CONFIG_SYS_MEMTEST_END		0x08F00000
 
-#undef	CONFIG_SYS_CLKS_IN_HZ			     /* use HZ for freq. display     */
-
 #define CONFIG_SYS_HZ			3686400	     /* incrementer freq: 3.6864 MHz */
 #define CONFIG_SYS_CPUSPEED		0x141	     /* core clock - register value  */
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_BAUDRATE 115200
 /*
  * Definitions related to passing arguments to kernel.
@@ -99,24 +93,12 @@
 #define CONFIG_CMDLINE_TAG	     1	 /* send commandline to Kernel	     */
 #define CONFIG_SETUP_MEMORY_TAGS     1	 /* send memory definition to kernel */
 #define CONFIG_INITRD_TAG	     1	 /* send initrd params		     */
-#undef	CONFIG_VFD			 /* do not send framebuffer setup    */
-
 
 /*
  * Malloc pool need to host env + 128 Kb reserve for other allocations.
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128<<10) )
 
-
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-
-#define CONFIG_STACKSIZE	(120<<10)      /* stack size		     */
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4<<10)	       /* IRQ stack		     */
-#define CONFIG_STACKSIZE_FIQ	(4<<10)	       /* FIQ stack		     */
-#endif
-
 /* SDRAM Setup Values
 0x910a8300 Precharge Command CAS 3
 0x910a8200 Precharge Command CAS 2
@@ -135,14 +117,10 @@
 #define SCB9328_SDRAM_1		0x08000000	/* SDRAM bank #1	   */
 #define SCB9328_SDRAM_1_SIZE	0x01000000	/* 16 MB		   */
 
-/*
- * Flash Controller settings
- */
-
-/*
- * Hardware drivers
- */
+#define CONFIG_SYS_TEXT_BASE	0x10000000
 
+#define CONFIG_SYS_SDRAM_BASE	SCB9328_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR	(SCB9328_SDRAM_1 + 0xf00000)
 
 /*
  * Configuration for FLASH memory for the Synertronixx board