X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsc520_spunk.h;h=d42ef84216726a99944cfcb786dacba02324bb05;hb=3405f38a15eec5092ac47efe0829f10a24491c6e;hp=50af7324aac1579138065f88470503ef08c596a1;hpb=ef29884b2708a6cce3b77f4ccaeea193d4e02c22;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index 50af732..d42ef84 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -28,13 +28,15 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
 /*
  * High Level Configuration Options
  * (easy to change)
  */
 
 #define CONFIG_X86		1	/* This is a X86 CPU		*/
-#define CONFIG_SC520		1	/* Include support for AMD SC520 */
+#define CONFIG_SYS_SC520	1	/* Include support for AMD SC520 */
 
 #define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6     /* 6T */
 #define CONFIG_SYS_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
@@ -45,10 +47,12 @@
 #define CONFIG_SYS_SDRAM_CAS_LATENCY_3T
 
 #define CONFIG_SYS_SC520_HIGH_SPEED    0       /* 100 or 133MHz */
-#undef  CONFIG_SYS_RESET_SC520                 /* use SC520 MMCR's to reset cpu */
-#undef  CONFIG_SYS_TIMER_SC520                 /* use SC520 swtimers */
-#define CONFIG_SYS_TIMER_GENERIC       1       /* use the i8254 PIT timers */
-#undef  CONFIG_SYS_TIMER_TSC                   /* use the Pentium TSC timers */
+#undef  CONFIG_SYS_SC520_RESET                 /* use SC520 MMCR's to reset cpu */
+#undef  CONFIG_SYS_SC520_TIMER                 /* use SC520 swtimers */
+#define CONFIG_SYS_GENERIC_TIMER       1       /* use the i8254 PIT timers */
+#undef  CONFIG_SYS_TSC_TIMER                   /* use the Pentium TSC timers */
+#define CONFIG_SYS_PCAT_INTERRUPTS
+#define CONFIG_SYS_NUM_IRQS		16
 
 #define CONFIG_SYS_STACK_SIZE          0x8000  /* Size of bootloader stack */
 
@@ -113,8 +117,6 @@
 #define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x01000000	/* 1 ... 16 MB in DRAM	*/
 
-#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
 #define	CONFIG_SYS_HZ			1024		/* incrementer freq: 1kHz */
@@ -173,7 +175,7 @@
  *
  */
 /* No command line, one static partition, whole device */
-#undef CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV		"nor0"
 #define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
 #define CONFIG_JFFS2_PART_OFFSET	0x00000000
@@ -181,7 +183,7 @@
 /* mtdparts command line support */
 /* Note: fake mtd_id used, no linux mtd map file */
 /*
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT		"nor0=sc520_spunk-0"
 #define MTDPARTS_DEFAULT	"mtdparts=sc520_spunk-0:-(jffs2)"
 */