X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsc520_cdp.h;h=0e830b878d4cdc26b744c14afe738526d187eb10;hb=29f8f58ff40c67f7f2e11afd1715173094e52ac2;hp=8b2ec077bd94e167c40018c3cdc3fc48beeb6faa;hpb=98c440bee623ecdd5322852732b883e696fb2140;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 8b2ec07..0e830b8 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -64,24 +64,37 @@
  */
 #define CONFIG_MALLOC_SIZE	(CFG_ENV_SIZE + 128*1024)
 
-
 #define CONFIG_BAUDRATE		9600
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SATA
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_EEPROM
 
 #define CONFIG_BOOTDELAY	15
-#define CONFIG_BOOTARGS    	"root=/dev/mtdblock0 console=ttyS0,9600"
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 console=ttyS0,9600"
 /* #define CONFIG_BOOTCOMMAND	"bootm 38000000" */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
-
 /*
  * Miscellaneous configurable options
  */
@@ -104,7 +117,6 @@
 						/* valid baudrates */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -113,8 +125,6 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-
-
 #define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks		*/
 #define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
 
@@ -125,11 +135,9 @@
 #define CONFIG_SPI_EEPROM      /* Support for SPI EEPROMs (AT25128) */
 #define CONFIG_MW_EEPROM       /* Support for MicroWire EEPROMs (AT93LC46) */
 
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
-
 /* Environment in EEPROM */
 #define CFG_ENV_IS_IN_EEPROM   1
 #define CONFIG_SPI
@@ -165,37 +173,14 @@
 #define PCNET_HAS_PROM         1
 
 /************************************************************
- * IDE/ATA stuff
- ************************************************************/
-#define CFG_IDE_MAXBUS		1   /* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-
-#define CFG_ATA_IDE0_OFFSET	0x01F0	/* ide0 offste */
-/*#define CFG_ATA_IDE1_OFFSET	0x0170	/###* ide1 offset */
-#define CFG_ATA_DATA_OFFSET	0	/* data reg offset	*/
-#define CFG_ATA_REG_OFFSET	0	/* reg offset */
-#define CFG_ATA_ALT_OFFSET	0x200	/* alternate register offset */
-#define CFG_ATA_BASE_ADDR       0
-
-#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
-#undef  CONFIG_IDE_RESET		/* reset for ide unsupported...	*/
-#undef  CONFIG_IDE_RESET_ROUTINE	/* no special reset function */
-
-/************************************************************
 *SATA/Native Stuff
 ************************************************************/
-#define CFG_SATA_SUPPORTED      1
 #define CFG_SATA_MAXBUS         2       /*Max Sata buses supported */
 #define CFG_SATA_DEVS_PER_BUS   2      /*Max no. of devices per bus/port */
-#define CFG_SATA_MAXDEVICES     (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
+#define CFG_SATA_MAX_DEVICE     (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
 #define CFG_ATA_PIIX            1       /*Supports ata_piix driver */
 
 /************************************************************
- * ATAPI support (experimental)
- ************************************************************/
-#define CONFIG_ATAPI			/* enable ATAPI Support */
-
-/************************************************************
  * DISK Partition support
  ************************************************************/
 #define CONFIG_DOS_PARTITION
@@ -209,7 +194,6 @@
 #define CONFIG_I8042_KBD
 #define CFG_ISA_IO 0
 
-
 /************************************************************
  * RTC
  ***********************************************************/