X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsc3.h;h=d00f2480cb6a256219771f73340278ca43ec4d4a;hb=d0b0dcaa220549999d6ea74cf87487846c186a0f;hp=44135dfac5405678969c4bd5751f223cb11c8e1c;hpb=f82642e33899766892499b163e60560fbbf87773;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 44135df..d00f248 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -63,6 +63,7 @@
 #define CONFIG_405GP	1
 
 #define CONFIG_BOARD_EARLY_INIT_F	1
+#define CONFIG_MISC_INIT_R		1	/* Call misc_init_r() */
 
 /*
  * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range
@@ -122,7 +123,7 @@
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=/tftpboot/sc3/uImage\0"				\
 	"u-boot=/tftpboot/sc3/u-boot.bin\0"				\
-	"setup=tftp 200000 /tftpboot/sc3/setup.img;autoscr 200000\0"	\
+	"setup=tftp 200000 /tftpboot/sc3/setup.img;source 200000\0"	\
 	"kernel_addr=FFE08000\0"					\
 	""
 #undef CONFIG_BOOTCOMMAND
@@ -166,6 +167,8 @@
 /* #define CONFIG_EEPRO100_SROM_WRITE */
 /* #define CONFIG_SHOW_MAC */
 #define CONFIG_EEPRO100
+
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII 1			/* add 405GP MII PHY management		*/
 #define CONFIG_PHY_ADDR 1	/* the connected Phy defaults to address 1 */
 
@@ -184,20 +187,20 @@
 #include <config_cmd_default.h>
 
 
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SOURCE
 
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
@@ -248,6 +251,7 @@
  */
 #define  CONFIG_HARD_I2C		/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 
 #define I2C_INIT
 #define I2C_ACTIVE 0
@@ -373,11 +377,6 @@
  * CONFIG_SYS_FLASH_BASE   -> start address of internal flash
  * CONFIG_SYS_MONITOR_BASE -> start of u-boot
  */
-#ifndef __ASSEMBLER__
-extern unsigned long offsetOfBigFlash;
-extern unsigned long offsetOfEnvironment;
-#endif
-
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_FLASH_BASE		0xFFE00000
 #define CONFIG_SYS_MONITOR_BASE	0xFFFC0000     /* placed last 256k */
@@ -422,14 +421,12 @@ extern unsigned long offsetOfEnvironment;
  * NAND-FLASH stuff
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS		1
 #define CONFIG_SYS_NAND_BASE		0x77D00000
 
-
 #define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
 
 /* No command line, one static partition */
-#undef	CONFIG_JFFS2_CMDLINE
+#undef	CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV		"nand0"
 #define CONFIG_JFFS2_PART_SIZE		0x01000000
 #define CONFIG_JFFS2_PART_OFFSET	0x00000000