X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsc3.h;h=a254edabdf718926eaf79b6e0fc119a59f025008;hb=2cc195e0a5690bf022631ae420767e5b91c37476;hp=19084cec438667a7410f90e9b5a1c27d523f1725;hpb=5bea7e6ce3837e12e507a78211bbf902ab43252a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 19084ce..a254eda 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -62,6 +62,8 @@
 #define CONFIG_4xx	1
 #define CONFIG_405GP	1
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFFA0000
+
 #define CONFIG_BOARD_EARLY_INIT_F	1
 #define CONFIG_MISC_INIT_R		1	/* Call misc_init_r() */
 
@@ -76,15 +78,12 @@
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #define CONFIG_SERIAL_MULTI
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-/*
- * define CONFIG_POWER_DOWN if your cpu should power down while waiting for your input
- * Works only, if you have enabled the CONFIG_SERIAL_SOFTWARE_FIFO feature
- */
-#if CONFIG_SERIAL_SOFTWARE_FIFO
- #define CONFIG_POWER_DOWN
-#endif
 
 /*
  * define CONFIG_SYS_CLK_FREQ to your base crystal clock in Hz
@@ -380,7 +379,7 @@
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_FLASH_BASE		0xFFE00000
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* Start of U-Boot	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* Start of U-Boot	*/
 #define CONFIG_SYS_MONITOR_LEN		(0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 KiB for malloc()	*/
 
@@ -464,7 +463,7 @@
 /* Where the internal SRAM starts */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR
 /* Where the internal SRAM ends (only offset) */
-#define CONFIG_SYS_INIT_RAM_END	0x0F00
+#define CONFIG_SYS_INIT_RAM_SIZE	0x0F00
 
 /*
 
@@ -477,24 +476,14 @@
 			   |	      |
 			   | 64 Bytes |
 			   |	      |
- CONFIG_SYS_INIT_RAM_END  ------> ------------ higher address
+ CONFIG_SYS_INIT_RAM_SIZE  ------> ------------ higher address
   (offset only)
 
 */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE     64
-#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 /* Initial value of the stack pointern in internal SRAM */
 #define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* ################################################################################### */
 /* These defines will be used in arch/powerpc/cpu/ppc4xx/cpu_init.c to setup external chip selects  */
 /* They are currently undefined cause they are initiaized in board/solidcard3/init.S   */
@@ -528,7 +517,7 @@
 
 #define CONFIG_SYS_EBC_CFG    0xb84ef000
 
-#define CONFIG_SDRAM_BANK0	/* use the standard SDRAM initialization */
+#undef CONFIG_SDRAM_BANK0	/* use private SDRAM initialization */
 #undef CONFIG_SPD_EEPROM
 
 /*