X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsbc8560.h;h=81a1e072c6d93ffbf6b5688a19a9652811f7c019;hb=cfd60441d8360cb9ffa315ecf3a2aef9bc134905;hp=5a434dc767b7937f53cc17c020263358ea7ee76e;hpb=05b47540aae996908e48e10a5ff8b69862aadef3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 5a434dc..81a1e07 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -50,6 +50,7 @@
 #undef	CONFIG_PCI			/* pci ethernet support		*/
 #undef  CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support	*/
 
+#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_ENV_OVERWRITE
 
@@ -92,6 +93,7 @@
 #else
   #define CFG_CCSRBAR		0xff700000	/* default CCSRBAR	*/
 #endif
+#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
 
 #define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory	 */
@@ -197,12 +199,16 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 #define CFG_PCI_MEM_BASE	0xC0000000
 #define CFG_PCI_MEM_PHYS	0xC0000000
@@ -316,28 +322,37 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+    #define CONFIG_CMD_MII
+#endif
+
 #if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PCI | \
-				CFG_CMD_PING | CFG_CMD_I2C) & \
-				 ~(CFG_CMD_ENV | \
-				  CFG_CMD_LOADS ))
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_MII | \
-				CFG_CMD_PING | CFG_CMD_I2C) & \
-				~(CFG_CMD_ENV))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | \
-				CFG_CMD_PING | CFG_CMD_I2C)
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_MII | \
-				CFG_CMD_PING | CFG_CMD_I2C)
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -346,7 +361,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"SBC8560=> " /* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
   #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
   #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -364,13 +379,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
@@ -379,7 +387,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot		*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
   #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
   #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif