X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsbc8349.h;h=c0b2aa707a4534777433b0c8353c50e63c534c83;hb=6f6b7cfa89e5aa3b643196a4ccc8b1ba5d6fa7a4;hp=6c0932a8dfd482d1ab42841901b4dcb5455bbb31;hpb=a212d6966bfcf393e82e44246d7dfb6de032e82a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 6c0932a..c0b2aa7 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -15,17 +15,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC834x		1	/* MPC834x family */
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
-#define CONFIG_SBC8349		1	/* WRS SBC8349 board specific */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFF800000
 
 /* Don't enable PCI2 on sbc834x - it doesn't exist physically. */
 #undef CONFIG_MPC83XX_PCI2		/* support for 2nd PCI controller */
@@ -52,8 +47,6 @@
 #endif
 #endif
 
-#undef CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
-
 #define CONFIG_SYS_IMMR		0xE0000000
 
 #undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
@@ -266,7 +259,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX     1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -277,9 +269,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -332,8 +321,6 @@
 #undef PCI_ONE_PCI1
 #endif
 
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
@@ -376,7 +363,6 @@
  * Environment
  */
 #ifndef CONFIG_SYS_RAMBOOT
-	#define CONFIG_ENV_IS_IN_FLASH	1
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
 	#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
 	#define CONFIG_ENV_SIZE		0x2000
@@ -386,8 +372,6 @@
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #else
-	#define CONFIG_SYS_NO_FLASH	1	/* Flash is not usable now */
-	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 	#define CONFIG_ENV_SIZE		0x2000
 #endif
@@ -399,38 +383,18 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
 
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
-#else
-	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-#endif
-
-				/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -641,11 +605,6 @@
 				/* default location for tftp and bootm */
 #define CONFIG_LOADADDR		800000
 
-#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
-#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE	 115200
-
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"hostname=sbc8349\0"						\