X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsbc8349.h;h=74815567ff922a4daf7422c48b9e716ac611cb9f;hb=29f8f58ff40c67f7f2e11afd1715173094e52ac2;hp=81322dfc70cfad49bb0dc4c8f1acd02a43d05b13;hpb=866e3089bfc826bb4dc74637f8aad87a3bab79fc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 81322df..7481556 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -31,8 +31,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */
@@ -310,16 +308,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE	8192
-
-#define OF_CPU			"PowerPC,8349@0"
-#define OF_SOC			"soc8349@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
@@ -328,7 +319,7 @@
 #define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
 #define CFG_I2C1_OFFSET		0x3000
 #define CFG_I2C2_OFFSET		0x3100
 #define CFG_I2C_OFFSET		CFG_I2C2_OFFSET
@@ -410,6 +401,8 @@
 #define TSEC2_PHY_ADDR		0x1a
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC2_FLAGS		TSEC_GIGABIT
 
 /* Options are: TSEC[0-1] */
 #define CONFIG_ETHPRIME		"TSEC0"
@@ -441,6 +434,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
@@ -450,7 +452,7 @@
 #define CONFIG_CMD_PING
 
 #if defined(CONFIG_PCI)
-    #define CONFG_CMD_PCI
+    #define CONFIG_CMD_PCI
 #endif
 
 #if defined(CFG_RAMBOOT)
@@ -486,13 +488,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 #define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 
 #if 1 /*528/264*/
@@ -575,6 +570,8 @@
 
 #define CFG_HID2 HID2_HBE
 
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
+
 /* DDR @ 0x00000000 */
 #define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
@@ -651,6 +648,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR		00:a0:1e:a0:13:8d
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR		00:a0:1e:a0:13:8e
@@ -666,7 +664,7 @@
 #define CONFIG_GATEWAYIP	192.168.1.1
 #define CONFIG_NETMASK		255.255.255.0
 
-#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS			/* the boot command will set bootargs */
@@ -675,7 +673,7 @@
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
-	"hostname=sbc8349\0"					\
+	"hostname=sbc8349\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -692,9 +690,9 @@
 	"load=tftp 100000 /tftpboot/sbc8349/u-boot.bin\0"		\
 	"update=protect off fff00000 fff3ffff; "			\
 		"era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0"	\
-	"upd=run load;run update\0"					\
+	"upd=run load update\0"						\
 	"fdtaddr=400000\0"						\
-	"fdtfile=sbc8349.dtb\0"					\
+	"fdtfile=sbc8349.dtb\0"						\
 	""
 
 #define CONFIG_NFSBOOTCOMMAND	                                        \